hi im new on the club im from puerto rico I got a 2000 boneville se and i was wondering with what mods to start I already started with a homemade intake with an aftermarket cone filter

If you don't have a heat shield to block HOT engine bay air that would be next on the list. Also, a quick cheap upgrade would be a 180* thermostat to keep things running cooler, along with a basic tuneup including plugs (NGK-TR55'*) and wires (Napa Belden Premium) to make sure everything is running well. You might get a nice result from cleaning your (probably) dirty throttle body too. Lots of members have done this recently and have posted some good pics.

yeppers to everything dillcc said; did that and a little more (belts)...

i'm happy.

were can i get a heat shield and how much it cost

you have to make your own....noone makes one

oh from what material you recomend me to make it from

A lot of people use plexiglass with angled brackets. Do a search on "rice pipe" and you'll get some good ideas.

after that and the tune up and the throttle body cleaning with what should i continue

www.intense-racing.com
www.zzperformance.com
www.wbodystore.com (only some engine trans parts will work... most will, but inquire before you buy or product info indicates it will fit your 2002 Bonneville)
www.3800performance.com

And there are a couple more, but they skip my mind ATM.

You can also swap a Supercharged top end on, but it will require a custom reprogrammed PCM. Parts required are all pulleys (L67 specific), SC head, Lower intake manifold, supercharger, throttle body, fuel rail, fuel injectors, and more.

You can get used Supercharged parts @ www.car-part.com but most salvage yards won't ship to Puerto Rico.


BTW -Welcome Puerto Rico.

thanks for the info