Latest Dyno 321HP 413ft/lb Torque
Senior Member
True Car Nut
Joined: Dec 2002
Posts: 5,857
Likes: 0
From: Halifax, Canada 91SSE / 97SSEi
Originally Posted by Rogue
Everyone needs a baseline. I can post my 3.4/cai dyno if it will make you feel better
If nothing else do it for the experience....How much do you pay for a run at the dyno?
I haven't phoned up any places around here... but my friend said they normally charge $78 for a run. That sounds a bit much for me... $78 a few times can go towards making power instead of measuring it. $35 wouldn't be too bad.
All prices are in Cdn funds...
Senior Member
Posts like a Camaro
Joined: Aug 2003
Posts: 1,177
Likes: 0
From: Cleveland, Ohio
I think some places charge by the hour... like you can run it... then tweak it, then run it again. I think that was something like 100USD an hour but I have not looked in a while...
Senior Member
Certified GM nut
Joined: Jul 2003
Posts: 1,712
Likes: 0
From: Chicagoland
Very nice there buddy, Can't wait to follow in your footsteps, By Bonniefest I'll be there! Your going right?
I'll get it dyno'ed too, curious if basicly the same mod list will dyno real close, I'm betting it will but just for fun I'll go.
I'll get it dyno'ed too, curious if basicly the same mod list will dyno real close, I'm betting it will but just for fun I'll go.
Executed
Joined: Aug 2002
Posts: 0
Likes: 0
From: Purgatory
Congratulations on your numbers Todd!
I think the spark and fueling changes we made today will increase your peak power a little bit more. As of this afternoon, your current PCM is now exactly the same as the 'production' INTENSE Standard PCM, with the exception of your slightly firmer shifts under heavy throttle.
Scott
p.*. - wasn't the 32 second PCM rewrite process impressive?
I think the spark and fueling changes we made today will increase your peak power a little bit more. As of this afternoon, your current PCM is now exactly the same as the 'production' INTENSE Standard PCM, with the exception of your slightly firmer shifts under heavy throttle.
Scott
p.*. - wasn't the 32 second PCM rewrite process impressive?
Thread Starter
Senior Member
True Car Nut
Joined: Jul 2003
Posts: 6,127
Likes: 1
From: Westerville, Ohio 2000 Black SSEi
Originally Posted by BadSSEi
Congratulations on your numbers Todd!
I think the spark and fueling changes we made today will increase your peak power a little bit more. As of this afternoon, your current PCM is now exactly the same as the 'production' INTENSE Standard PCM, with the exception of your slightly firmer shifts under heavy throttle.
Scott
p.*. - wasn't the 32 second PCM rewrite process impressive?
I think the spark and fueling changes we made today will increase your peak power a little bit more. As of this afternoon, your current PCM is now exactly the same as the 'production' INTENSE Standard PCM, with the exception of your slightly firmer shifts under heavy throttle.
Scott
p.*. - wasn't the 32 second PCM rewrite process impressive?
Oh, and the 32 second write just means you can do 4 times as many PCM'* for me in the same amount of time
(yes its damn impressive)
Senior Member
Posts like a Corvette
Joined: Jan 2003
Posts: 1,250
Likes: 0
Not to get too off topic or anything but thats a ton of power for our transmissions. Ive heard about them being weak for upgrades since our cars are so naturally strong, but once you reach that point is there ANYTHING we can do about it? Like a stronger drop in transmission or a rebuild/upgrade to raise the maximum torque limit from them?
Or are we stuck replacing them alot?
Or are we stuck replacing them alot?
Thread Starter
Senior Member
True Car Nut
Joined: Jul 2003
Posts: 6,127
Likes: 1
From: Westerville, Ohio 2000 Black SSEi
Originally Posted by bmsgaffer86
Not to get too off topic or anything but thats a ton of power for our transmissions. Ive heard about them being weak for upgrades since our cars are so naturally strong, but once you reach that point is there ANYTHING we can do about it? Like a stronger drop in transmission or a rebuild/upgrade to raise the maximum torque limit from them?
Or are we stuck replacing them alot?
Or are we stuck replacing them alot?
