L26 parts for my L36
Thread Starter
Senior Member
Posts like a Corvette
Joined: Feb 2009
Posts: 1,511
Likes: 0
From: Jersey Shore
L26 parts for my L36
SO there is * grand prix with a L26 at my local junk yard. What can I put on my car that would make it better. The Upper Intake, Heads, Exhaust manifolds, I'm willing to take anything off and mod it up to mine for any gains. Thanks Guys
Senior Member
Certified Car Nut
Joined: Oct 2003
Posts: 19,756
Likes: 1
the Upper intake will fit, you will need a TB adapter for the UIM to TB.
the L26 heads are reported to have slightly larger valves.
The LIM and the UIM insert is the same as yours, you could grad the lower as a spare and then port match to the LIM gaskets
the L26 heads are reported to have slightly larger valves.
The LIM and the UIM insert is the same as yours, you could grad the lower as a spare and then port match to the LIM gaskets
DINOSAURUS BOOSTUS
Expert Gearhead
Joined: Mar 2005
Posts: 41,391
Likes: 30
From: Enfield, CT
Grab the whole motor. 
The L26 upper is metal, not like the L36 plastic. It'* not a bad swap over to the metal manifold. Overall though.. there'* lots of parts you "could use"
The L26 upper is metal, not like the L36 plastic. It'* not a bad swap over to the metal manifold. Overall though.. there'* lots of parts you "could use"
Thread
Thread Starter
Forum
Replies
Last Post
radomirthegreat
Performance, Brainstorming & Tuning
3
Feb 1, 2008 01:45 AM
95SLE
Performance, Brainstorming & Tuning
22
Aug 3, 2007 11:07 AM