Intense Performance Package
#11
Senior Member
True Car Nut
I'm not sure if the Thrasher pulley puller is the same one you need, but Jim0170 is selling one here:
http://www.bonnevilleclub.com/forum/...asc&highlight=
http://www.bonnevilleclub.com/forum/...asc&highlight=
#15
Senior Member
True Car Nut
Some places near me, like the Napa and a couple tool rental places (you know, like the ones that rent tillers, power washers and such) rent pulley pullers. I haven't used them for my car, but I rented a large one to remove and re-install the pulley of an air compressor.
#16
Junior Member
Posts like a Ricer Type-R
Lash, you can't use a standard puller. Most places won't even know what he'* talking about, much less have the right type.
The puller he needs was specifically designed for that type of use.
The puller he needs was specifically designed for that type of use.
#18
DINOSAURUS BOOSTUS
Expert Gearhead
Let'* clarify for our friends
Series 1 SC pullies can be done with a 3 jaw standard puller.
Series 2 SC pullies require special pullers made specificially for this application... These pullies should never be attempted with a standard puller. There are documented cases here that show what happens.
McGrath'*
Series 1 SC pullies can be done with a 3 jaw standard puller.
Series 2 SC pullies require special pullers made specificially for this application... These pullies should never be attempted with a standard puller. There are documented cases here that show what happens.
McGrath'*
Thread
Thread Starter
Forum
Replies
Last Post
95SLE
Performance, Brainstorming & Tuning
22
08-03-2007 11:07 AM
'00OHIOBONNESSEi
Performance, Brainstorming & Tuning
4
07-25-2006 11:58 PM
crazyjoe
Performance, Brainstorming & Tuning
10
03-08-2006 11:36 PM