My Exhaust
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Nov 2005
Location: Nebraska
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
My Exhaust
So i guess i lazily measured my tailpipes, they are only about 2" in diameter..and i thought they were 2.25"...the guy welded the tailpipes to fit.........if i was to get 2.25" tailpipes, would the sound be deeper? or would it really make a difference?
also, im tryin to find some exhaust tips that i could put in the stock location, and use the stock clamp....anybody found some that will work?
also, im tryin to find some exhaust tips that i could put in the stock location, and use the stock clamp....anybody found some that will work?
#2
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
Did you measure the pipe near the rear bumper or pipe ahead of the muffler?
Regardless you don't want to go to a smaller dia. it will do nothing for sound and only hurt performance. If you are looking for deeper exhaust note, get a high flow cat; that was the first change I made to my exhaust and it made the oem system sound much deeper. And it was pretty cheap to boot.
Ed
Regardless you don't want to go to a smaller dia. it will do nothing for sound and only hurt performance. If you are looking for deeper exhaust note, get a high flow cat; that was the first change I made to my exhaust and it made the oem system sound much deeper. And it was pretty cheap to boot.
Ed
Thread
Thread Starter
Forum
Replies
Last Post
Charlie
Performance, Brainstorming & Tuning
29
08-09-2004 10:03 PM