The Comprehensive Guide to Gutting a Series 2 Airbox
#11
Member
Posts like a V-Tak
Join Date: Sep 2005
Location: Edmonton Alberta
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Since were on the topic of airboxes, I think I'll share too. I've got a stock air box, and I"ve done similar mods. 1. I removed the old air scoop and replaced it with a larger 4inch intake tube
also i cut out 3 2ince holes and placed 3 two and a half foot long tubes in the air box. However I'm not sure if I should run the tube underneath the bumber and mount them so they face outwards. Will this cause any problems if it is raining out, I don't want any water getting in the intake. I've seen others with mods that run ram air scoops under the bumper, and FWI has anyone had any problems.
also i cut out 3 2ince holes and placed 3 two and a half foot long tubes in the air box. However I'm not sure if I should run the tube underneath the bumber and mount them so they face outwards. Will this cause any problems if it is raining out, I don't want any water getting in the intake. I've seen others with mods that run ram air scoops under the bumper, and FWI has anyone had any problems.
#12
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2006
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
if your going to do it, put the scoops right above the chin spoiler, but right under the bar with the fog lights...that way it wont be too close to the ground and you wont have a clearance issue...
Thread
Thread Starter
Forum
Replies
Last Post
Nytro67
Performance, Brainstorming & Tuning
6
06-06-2003 09:42 AM
toxictelevision
Performance, Brainstorming & Tuning
0
02-09-2003 11:11 PM