Getting screw from bottom of airbox out
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Aug 2003
Location: Buffalo Grove, IL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Getting screw from bottom of airbox out
I am trying to get a screw from the bottom of the front airbox out. It is impossible to reach. Any tips would be great. It is the front one closer to the headlight, where the filter generally sits.
#2
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Mine'* a 94 but not sure if your box is similar in how it'* screwed in. But the one screw holding mine down on the bottom was a huge PITA to get out. I don't think I was able to do it without removing the accordian tube first.
#3
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Aug 2003
Location: Buffalo Grove, IL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, must be different then, my accordian tube is far away from the bottom screw. There is a little plastic overhang on the screw, which is what makes it hard to reach. I will probably just cut around it to give myself access.
#5
Senior Member
Posts like a Turbo
Join Date: Apr 2003
Location: Arkansas
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Mine doesn't have a screw at the bottom. Take the accordian tube off and the back side of the airbox. Then the two front screws out and the bottom is just a little peice of metal stuck into some rubber. Just pull up on it and it slips right off.
Thread
Thread Starter
Forum
Replies
Last Post
Wolfedog50
Performance, Brainstorming & Tuning
3
05-08-2003 01:31 PM