does anyone know of a good place I can run a linethrough the firewall to a boost gauge for the pressure?

also where is the PCV on an l67 I cant find any post that point it out on a s2 SC?

the SSEi should already have a boost gague on the cluster, anyway...there is a grommet in the drivers side right behind the strut tower that you use...i ran all my wires through there

What'* wrong with the boost gauge that came with the car?

I added one to my supercharged SLE, but only because it didn't come with one. Only SSEi'* got the boost gauge.

The PCV is under a little square cover on the top of your SC. Held by two screws. Should be black and say 'PCV'.

ok and I want a boost gauge cause I got a pully on the wa6y and the other one will be maxed out mostly just for looks
I thought that was a pcv block off plate

Your pulley won't exceed the stock indicated boost.

well got the pcv changed to willwren.
well my stock boost gauge is off somtimes compared to the scanner its mostly for looks but I got it cheap so...

the stock gauge will always be off because its an elecrical unit not a mechanical one, but its close enough....even the Rogue 12 sec street driven bonneville uses the stock gague

yea I know it'* kindapointless, but then so are my clear corners and tinted tails. Just for looks basically.
Anyone know where I can get PEMs on S2 for cheap I dont have enough for those $500 headers