Any off the shelf tail pipes for the magnaflow?

Reply Subscribe

Thread Tools

Search this Thread

Jan 14, 2010 | 06:09 PM

tomgreco

Guest

Posts: n/a

Any off the shelf tail pipes for the magnaflow?

Hi all,

I just bought a magnaflow 12265 with 2.5 in/outlet and have searched for days to see if there is anything on the shelf that would fit. I'd rather not go with the stock 2.25 tail pipes if I can help it, but it may be my only choice. Does anyone know if the Firebird 2.5 tail pipes can be used? What year applies?

Thanks!

Jan 14, 2010 | 11:49 PM

roboticjunky

Senior Member

Posts like a Turbo

Joined: Aug 2009

Posts: 487

Likes: 0

From: Indiana

Here'* a list of exhaust tips from Summit Racing that will fit a 2.5" pipe.
http://www.summitracing.com/search/D.../?Ns=Price|Asc

These two tips look similar to the tips used on the late Firebirds.

http://www.summitracing.com/parts/EDL-5592/

http://www.summitracing.com/parts/JEX-POR512SS/

Jan 15, 2010 | 11:13 AM

tomgreco

Guest

Posts: n/a

Tips are no problem. I need the two tailpipes from the muffler.

Jan 15, 2010 | 11:16 AM

Danthurs

Retired Senior Admin

Expert Gearhead

Joined: May 2006

Posts: 29,661

Likes: 43

From: Sheboygan Wisconsin

Any custom exhaust shop should be able to weld up what ever you need. Check what you have local. I go to a local shop here and they bend, cut, and weld what ever is needed.

Jan 15, 2010 | 11:27 AM

roboticjunky

Senior Member

Posts like a Turbo

Joined: Aug 2009

Posts: 487

Likes: 0

From: Indiana

I agree with Dan. Just get an exhaust shop to make you new tail pipes.

I also did a little bit more searching and the Firebird'* tail pipes stock were 2 1/4".

Jan 15, 2010 | 11:55 AM

tomgreco

Guest

Posts: n/a

Anything on the shelf that would fit?

Jan 15, 2010 | 11:57 AM

Danthurs

Retired Senior Admin

Expert Gearhead

Joined: May 2006

Posts: 29,661

Likes: 43

From: Sheboygan Wisconsin

All I can think of is go to a place like autozone, and pick out adapters, that'* all I can think of.

Jan 15, 2010 | 12:07 PM

roboticjunky

Senior Member

Posts like a Turbo

Joined: Aug 2009

Posts: 487

Likes: 0

From: Indiana

Here'* a couple of tailpipes that are 2 1/2" for Firebirds, but would probably be cheaper just to get an exhaust shop to make you one.

http://www.summitracing.com/parts/WLK-43243/
http://www.summitracing.com/parts/WLK-43244/
http://www.summitracing.com/parts/WLK-42318/
http://www.summitracing.com/parts/WLK-42316/

Jan 15, 2010 | 01:52 PM

tomgreco

Guest

Posts: n/a

Thanks guys. Here'* why I asked for 'off the shelf'. Mr. Muffler, Waldorf, MD for 2 tail pipes, 2 hangars, 3 clamps = $286. Two pipes from Rockauto + shipping = $60

Last edited by tomgreco; Jan 15, 2010 at 02:53 PM.