29 cents mod
Thread Starter
Senior Member
Posts like a Camaro
Joined: Oct 2006
Posts: 987
Likes: 0
From: montreal canada NEBF07 ONBF07

yeah just did a 29 cents mod on my buick (and that canadien ) for a 1 amp diode that boost the voltage half a volts .befofe i had 13.8 to 14 volts now i have 14.4 to 14.6 on my aeroforce gauge .so i should get better output on my coils and fuel pump and brighter lights i think its good for 10 minuites work and 29 cents thank to zz performance
No clue what he was talking about until I found this:
http://www.zzperformance.com/grand_p...les1.php?id=48
http://www.zzperformance.com/grand_p...les1.php?id=48
Something to keep in mind is the bonne alternator is a slightly different setup than the GP alternator.
I've been sluggisly looking into if this will work for the bonne as well.
I've been sluggisly looking into if this will work for the bonne as well.
You can do anything..
The question is.. is your alternator setup the same and designed the same as this one that is in the GP'*?
If so..this should work for you. If not.. you stand a chance of harming the system, which is why I haven't done it w/o being able to do further research.
The question is.. is your alternator setup the same and designed the same as this one that is in the GP'*?
If so..this should work for you. If not.. you stand a chance of harming the system, which is why I haven't done it w/o being able to do further research.
ZZP shows this V-booster
https://www.zzperformance.com/grand_...ts1.php?id=517
and they state
New version has better soldering. Fixes the erratic voltage issues on certain cars. Now compatible with Regal and other 3 wire applications!
So they are stating it will work with other 3 wire applications...
https://www.zzperformance.com/grand_...ts1.php?id=517
and they state
New version has better soldering. Fixes the erratic voltage issues on certain cars. Now compatible with Regal and other 3 wire applications!
So they are stating it will work with other 3 wire applications...





