2,3" pulley at -92 SSEi, does it require bigger injectors?
#1
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Sweden
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2,3" pulley at -92 SSEi, does it require bigger injectors?
As topic, I made a 2,3" pulley to my stock -92 SSEi today, I wonder if it requires bigger injectors or if it would be any other problems?
The car is not in shape for a testrun at the moment so i´m not able to test it now.
I´ve searched, but I didn´t found any answer so I would appreciate some help. Some tips for more easier tuninghad also been nice!
It´* a 3800 gen 1, with a 2,5" pulley stock.
I´m from Sweden so my english isn´t too good, so I apologize if there is something difficult to understand!
The car is not in shape for a testrun at the moment so i´m not able to test it now.
I´ve searched, but I didn´t found any answer so I would appreciate some help. Some tips for more easier tuninghad also been nice!
It´* a 3800 gen 1, with a 2,5" pulley stock.
I´m from Sweden so my english isn´t too good, so I apologize if there is something difficult to understand!
Last edited by Emil123; 11-17-2009 at 07:53 PM.
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 29 Likes
on
25 Posts
Welcome to the club.
No need to change your injectors. They should be enough to deal with the higher boost. You will however need to watch for knock, preignition. As for tuning, these are the only guys I know of that tune your year, I hear they do a great job. Sinister Performance, LLC.
No need to change your injectors. They should be enough to deal with the higher boost. You will however need to watch for knock, preignition. As for tuning, these are the only guys I know of that tune your year, I hear they do a great job. Sinister Performance, LLC.
#3
Junior Member
Thread Starter
Join Date: Nov 2009
Location: Sweden
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the club.
No need to change your injectors. They should be enough to deal with the higher boost. You will however need to watch for knock, preignition. As for tuning, these are the only guys I know of that tune your year, I hear they do a great job. Sinister Performance, LLC.
No need to change your injectors. They should be enough to deal with the higher boost. You will however need to watch for knock, preignition. As for tuning, these are the only guys I know of that tune your year, I hear they do a great job. Sinister Performance, LLC.
Can you give an estimated power increase with only the pulley?
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Like Dan, I have more experience with the Series 2 motor, however my Series 1 experience tells me that you may or may not find an increase.
You may begin spinning the charger fast enough that it'* pumping more damaging heat than good air into the motor. The heat causes preignition.
You may begin spinning the charger fast enough that it'* pumping more damaging heat than good air into the motor. The heat causes preignition.
Thread
Thread Starter
Forum
Replies
Last Post