GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat

Lounge For casual talk about things unrelated to General Motors. In other words, off-topic stuff. And anything else that does not fit Section Description.

putting in new wheel stud

Thread Tools
 
Old May 2, 2007 | 09:57 PM
Share
  #1  
harofreak00's Avatar
harofreak00
Thread Starter
BANNED
 
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
harofreak00 is on a distinguished road
Default putting in new wheel stud
do i need to pull the assembly out? i already cut about 5mm off my 41mm stud, and its still not fitting

DSC06898.jpg
DSC06899-1.jpg
Reply
0
Old May 2, 2007 | 10:08 PM
Share
  #2  
95naSTA's Avatar
95naSTA
Senior Member
True Car Nut
 
Joined: Feb 2003
Posts: 4,508
Likes: 2
From: Philly
95naSTA is on a distinguished road
Default
Looks like you can just loosen the wheel bearing assembly from the knuckle and it will slide right in?
Reply
0
Old May 2, 2007 | 10:10 PM
Share
  #3  
harofreak00's Avatar
harofreak00
Thread Starter
BANNED
 
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
harofreak00 is on a distinguished road
Default
i was hoping for something simple, but ya, thats what I will have to do tomorrow.. i ran out ot light tonight
Reply
0
Old May 2, 2007 | 10:18 PM
Share
  #4  
PontiacDad's Avatar
PontiacDad
Senior Member
True Car Nut
 
Joined: Jun 2003
Posts: 6,313
Likes: 2
From: Purgatory
PontiacDad is on a distinguished road
Default
Yeah you have to loosen off the wheel hub enough to clear the stud.
Install the stud at the innermost notch in the knuckle, on the caliper side of the knuckle for easier clearence.
Reply
0
Old May 2, 2007 | 10:19 PM
Share
  #5  
harofreak00's Avatar
harofreak00
Thread Starter
BANNED
 
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
harofreak00 is on a distinguished road
Default
can i use a nut to draw the stud in, or does it have to be pounded?
Reply
0
Old May 2, 2007 | 10:20 PM
Share
  #6  
95naSTA's Avatar
95naSTA
Senior Member
True Car Nut
 
Joined: Feb 2003
Posts: 4,508
Likes: 2
From: Philly
95naSTA is on a distinguished road
Default
A nut and washers will work fine.
Reply
0
Old May 2, 2007 | 10:22 PM
Share
  #7  
PontiacDad's Avatar
PontiacDad
Senior Member
True Car Nut
 
Joined: Jun 2003
Posts: 6,313
Likes: 2
From: Purgatory
PontiacDad is on a distinguished road
Default
Originally Posted by 95naSTA
A nut and washers will work fine.
Works the best
Reply
0
Old May 3, 2007 | 12:04 AM
Share
  #8  
BonneMeMN's Avatar
BonneMeMN
Senior Member
Certified Car Nut
 
Joined: Jun 2003
Posts: 15,928
Likes: 1
BonneMeMN is on a distinguished road
Default
Is this that GA from your place, or your Lumina that almost killed us?
Reply
0
Old May 3, 2007 | 12:50 AM
Share
  #9  
slick94prix's Avatar
slick94prix
Senior Member
Posts like a Northstar
 
Joined: Mar 2007
Posts: 529
Likes: 0
From: Maumee, OH
slick94prix is on a distinguished road
Default
Yep, you have to pull the hub. It'* not hard.

I know from experience
Reply
0
Old May 3, 2007 | 08:13 AM
Share
  #10  
harofreak00's Avatar
harofreak00
Thread Starter
BANNED
 
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
harofreak00 is on a distinguished road
Default
thats the suicidal lumina
Reply
0



Advanced Search

All times are GMT -4. The time now is 04:53 PM.