When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
LoungeFor casual talk about things unrelated to General Motors. In other words, off-topic stuff. And anything else that does not fit Section Description.
Well, the way the world is going... stuff happens!
When things get all screwed up is usually due to some pointy headed college boy being involved.
The leaders of our illustrious nation all have one thing in common... they are
went to an institution of "higher learning" where they lost their common sense.
Well, the way the world is going... stuff happens!
When things get all screwed up is usually due to some pointy headed college boy being involved.
The leaders of our illustrious nation all have one thing in common... they are
went to an institution of "higher learning" where they lost their common sense.
You got that right. They lose love of country, self, and others as the marxists professors fill them with hatred and self loathing. If the government had a fab shop they would screw it up. They screw up everything they touch.
It'* just for a Silverado that I did a 2/3 drop on that has the raked look... I just wanted to lift the front just slightly
It'* not anything major as this is a budget kinda deal.
That way the over all front drop will be 1 and 1/2 inches and the back is 3.25 inches
On the front I used 2 inch drop spindles and on the back I used 2 inch shackles and then removed the factory 1.25 inch spacer between the leaf springs and the axle.
By raising the front by a half inch, the trick won't look so raked and will be closer to looking more level.
