BonneMeMN - You can't get us curious then not respond!
Whats the difference? Is it a different material? A different design? I'm really wondering what you know on this.

rickets:

ah hah!

i've found it!

at least i hope so - the cylinder heads on the l67 are home to your fuel injectors, while us n/a boys have them on our lower intake manifold!

i'd post a pic, but I can't ssh from work into my account... maybe when I get home...

Uhm...no they aren't, the injectors are in the manifold on */c'* also

dang. well, there'* deff. 3 holes on the top of the l67 heads that aren't on the l36 heads.

okay, this is on a cheapo free web host (i'll change that when i get home), so only a few of you will be able to see the pic before the link dies...

okay, hold up a minute...

given their location and proximity to the combustion chamber, i assumed (incorrectly, it would seem), that those were for the fuel injectors...

I just looked at my car ('95 SC), and the injectors are going into the Upper intake manifold right next there the bolts are the hold the SC on. There is no doubt about the location of them on mine. I have pics that I can upload tonight if needed.

so is that what mounts in the holes? the */c? or are those located more towards the center?

anyhew, no pic required, so long as you can let us know what goes in those holes there...

I think I know what you are looking at now....

Those may be different angles of the same setup. I bet those holes you see are actually for the sparkplugs.