1999 GMC Sierra 1500 4x4
#1
1999 GMC Sierra 1500 4x4
Is there a way to bypass the security system in this specific make and model and year of truck? When I brought the truck home after purchasing it there were some minor repairs. The truck was in running condition. Here is what I have done so far uptodate. I replace the front hub, replaced spark plugs, put in a new fuel filter and also replaced with a brand new battery from one that was weak.
Upon doing all of these repairs my truck will not start. The security system is now turned on and I would like to turn it off or bypass it somehow. When I pour gas directly into the carb, the truck will start but it will idle very rough and then die. I am pretty sure it does have something to do with the security system. Any help would greatly be appreciated.
Upon doing all of these repairs my truck will not start. The security system is now turned on and I would like to turn it off or bypass it somehow. When I pour gas directly into the carb, the truck will start but it will idle very rough and then die. I am pretty sure it does have something to do with the security system. Any help would greatly be appreciated.
#3
Senior Member
True Car Nut
the security light on?
the only reliable way is to disable it is to send it to blackbear or similar and have the security disabled in the pcm
the only reliable way is to disable it is to send it to blackbear or similar and have the security disabled in the pcm
#7
Senior Member
True Car Nut
now it sounds like you have a aftermarket alarm screwing things up. a 99 new body style should start and shut off a couple seconds later if vehicles security is bad and the light blinks. thats it. the other stuff means something else is wrong. possibly bad ign, or aftermarket alarm
Thread
Thread Starter
Forum
Replies
Last Post
iowaGMC
GMC/Chevrolet Truck/SUV
4
11-18-2013 12:25 AM