I put LED turn signals in the front of my 2004 Yukon XL Denali and I got the hyper flash. The I hooked up LED'* Tail lights after this install. On my tail lights I dont have Driving lights and stop lights when everything is connected. When I unhook the tail light turn signals I have my driving lights and stop lights back again and when I hook the turn signals up on the tail lights i lose my stop and driving lights but my rear turning lights work. Will hooking up resistors to my front Led turn signals cure my Hyper flash and also cure the problems with my tail light Driving, stop light and turn signal problem> Please I need some help because my yukon is undrivable right now. I order 2 6ohm 50 watt resistors and if I hook up the resistors on the front LED bulbs with this cure my Hyperflash and also will it cure the problems I have with my tail lights. I will owe you alot and I will also paypal you $40.00 if you can help me get this working with all LED'* intact. Gauranteeds.

You already have a thread going about your lights....

https://www.gmforum.com/gmc-chevrole...e-help-303246/