installing power seat into non power truck
Thread Starter
Junior Member
Joined: Jan 2014
Posts: 1
Likes: 0
installing power seat into non power truck
I was hoping for some help regarding a seat install that sounds very similar to this.
We have a pair of 98 Denali leather seats and I have been tasked with putting them into a 94 Yukon. I was able to figure out which wires were needed to get power to the passenger seat and all the functions are working. The driver seat has a black box underneath it and I cannot seem to get anything to work. It looks completely different underneath. Any help would be much appreciated.
We have a pair of 98 Denali leather seats and I have been tasked with putting them into a 94 Yukon. I was able to figure out which wires were needed to get power to the passenger seat and all the functions are working. The driver seat has a black box underneath it and I cannot seem to get anything to work. It looks completely different underneath. Any help would be much appreciated.
Senior Member
True Car Nut
Joined: Dec 2009
Posts: 9,616
Likes: 594
From: western,ny state
(1) Front Tilt Motor
(2) Forward/Back Motor
(3) Heated Seat Element
(4) Rear Tilt Motor
(5) Seat Harness
(6) Power Seat Lumbar Motor and Solenoid Assembly
(7) C212 (RH) / C229 (LH)
(
Crossbody Harness (9) Seat Riser
(10) Power Seat Lumbar Switch
(11) Power Seat Adjuster Switch
(12) Heated Seat Module (Typical)
Thread
Thread Starter
Forum
Replies
Last Post
options13
Everything Electrical & Electronic
11
Aug 13, 2006 01:42 PM
ELMACHOGERACHO
Performance, Brainstorming & Tuning
7
Aug 9, 2005 04:21 PM
