95 chevy 2500 with 5.7 misses
#1
95 chevy 2500 with 5.7 misses
My 95 chevy 2500 has a miss to it that I cannot seem to put my finger on. I replaced the fuel filter, spark plugs, plug wires, coil, gasket between the throttle body and the intake, cleaned the throttle body and now just replaced the throttle position sensor and I cannot get it to stop missing. If someone could help me I would greatly appreciate it!!
#5
I looked at the injectors and watched them spray and they have a nice clean even spray no real big drips or anything. Unfortunately I don't have a way to check fuel pressure or a code reader, but the check engine light is not on either. I'm just not sure where to look
#6
I took the idle air control valve out and wiped it clean also. Is the part on the end supposed to move somewhat freely? There'* a spring there and then what I believe is the valve on the end, but I couldn't make the end part move any. I didn't try too hard because I didn't want to damage it though. Could that be a problem? I've worked on vehicles and engines before but the sensors and such confuse me a little
#7
Senior Member
True Car Nut
IAC valve should not be causing a misfire. Do what JW suggested and get the fuel pressure checked. Most parts stores will loan them out for a deposit.
#9
Senior Member
True Car Nut
you need special fittings to check it on those. how many miles? sometimes the time has drifted if its got some miles, has to be set back to zero. its tough with no codes and no live data. sometimes its a mechanical issue, like carboned valves. compression would be a good thing to check.