Hi folks

Anyone have the electric diagram to my HVAC module ? I have something close but not exactly like in photo . wire colors are different .
I already checked fuses ...
I checked the volt in A/C PRESSURE CUT OFF SWITCH wire , it was 6v ...

how can I diagnostic the module ?

thanks

I decided to start with the vacuum system ...
I follow the vacuum hoses , and I found this part disconected , I fix it , still not work .
I try to found the vacuum canister , where it located ? Cause the hose that need to go to , blocked .
please any help or directions .
anyone have a scheme to the vacuum hose and locations ?

Here'* the electrical diagram for you HVAC system.
The vacuum diagram is lacking.. Just shows the evap system and a vac line coming from the throttle body to the dash. The reservoir should be near the apron of the wheel well.

Thank you
Do you know who supply volt to the HTR-AC fuse ?
cause I get 7V there , and when I disconnect the fuse I got 10V (in the supply side)

Ok , I found it , orange wire in the ignition switch .
now the vent work but the air not cold . The cluch compressor no engage .

Check gas pressures.