Turbo Regal
#1
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
A local asked me to put in a cam and transmission for him. 3 or so hours from the time I got home... It'* about time to go pick up a transmission. While waiting for the better time traffic wise I started in on the car.
The jack was made for this car.
![Name: IMG_6792.jpg
Views: 38
Size: 101.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21801d1501262657-turbo-regal-img_6792.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6793.jpg
Views: 38
Size: 62.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21802d1501262657-turbo-regal-img_6793.jpg?*=d0d7d0846534b5e14978e447bec95335)
Moisture on the pan
![Name: IMG_6794.jpg
Views: 34
Size: 53.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21803d1501262657-turbo-regal-img_6794.jpg?*=d0d7d0846534b5e14978e447bec95335)
Uh..yuck
![Name: IMG_6795.jpg
Views: 34
Size: 72.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21804d1501262657-turbo-regal-img_6795.jpg?*=d0d7d0846534b5e14978e447bec95335)
The car was cold
![Name: IMG_6798.jpg
Views: 35
Size: 90.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21805d1501262657-turbo-regal-img_6798.jpg?*=d0d7d0846534b5e14978e447bec95335)
Here'* the coolant hose wrap around. I'm thinking the heat of the cooling system did this, Ben can you please confirm, thanks.
![Name: IMG_6799.jpg
Views: 42
Size: 118.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21806d1501262657-turbo-regal-img_6799.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6800.jpg
Views: 32
Size: 94.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21807d1501262657-turbo-regal-img_6800.jpg?*=d0d7d0846534b5e14978e447bec95335)
Aussie tensioner
![Name: IMG_6802.jpg
Views: 38
Size: 79.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21808d1501262657-turbo-regal-img_6802.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6804.jpg
Views: 38
Size: 90.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21809d1501262657-turbo-regal-img_6804.jpg?*=d0d7d0846534b5e14978e447bec95335)
Located more moisture
![Name: IMG_6808.jpg
Views: 34
Size: 113.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21810d1501262657-turbo-regal-img_6808.jpg?*=d0d7d0846534b5e14978e447bec95335)
Gettin in there
![Name: IMG_6809.jpg
Views: 31
Size: 154.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21811d1501262657-turbo-regal-img_6809.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6810.jpg
Views: 38
Size: 145.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21812d1501262657-turbo-regal-img_6810.jpg?*=d0d7d0846534b5e14978e447bec95335)
Who'* great idea at ZZP was it to not tap the metal of the flange? ZZFail I tell ya. It could have been much easier, much. Ben used 15mm nuts here, and 14'* on the downpipe. Kept me hopping to the toolbox, thanks for the exercise, lol
![Name: IMG_6815.jpg
Views: 34
Size: 118.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21813d1501262657-turbo-regal-img_6815.jpg?*=d0d7d0846534b5e14978e447bec95335)
Here kitty kitty, this might rub in reverse. Although there were no signs that it ever did.
![Name: IMG_6817.jpg
Views: 31
Size: 77.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21814d1501262657-turbo-regal-img_6817.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6818.jpg
Views: 36
Size: 92.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21815d1501262657-turbo-regal-img_6818.jpg?*=d0d7d0846534b5e14978e447bec95335)
Now we can get into the valve cover.
![Name: IMG_6819.jpg
Views: 31
Size: 116.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21816d1501262657-turbo-regal-img_6819.jpg?*=d0d7d0846534b5e14978e447bec95335)
Here is a super clean engine.
![Name: IMG_6821.jpg
Views: 36
Size: 148.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21817d1501262657-turbo-regal-img_6821.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6822.jpg
Views: 39
Size: 120.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21818d1501262657-turbo-regal-img_6822.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6824.jpg
Views: 35
Size: 154.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21819d1501262657-turbo-regal-img_6824.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6827.jpg
Views: 36
Size: 163.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21820d1501262657-turbo-regal-img_6827.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6830.jpg
Views: 32
Size: 126.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21821d1501262657-turbo-regal-img_6830.jpg?*=d0d7d0846534b5e14978e447bec95335)
Paul..you want left or right?
![Name: IMG_6832.jpg
Views: 39
Size: 109.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21822d1501262657-turbo-regal-img_6832.jpg?*=d0d7d0846534b5e14978e447bec95335)
How it sleeps until I return with the trans and a small pan to put the lifters in to soak
![Name: IMG_6833.jpg
Views: 35
Size: 85.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21823d1501262657-turbo-regal-img_6833.jpg?*=d0d7d0846534b5e14978e447bec95335)
The jack was made for this car.
![Name: IMG_6792.jpg
Views: 38
Size: 101.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21801d1501262657-turbo-regal-img_6792.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6793.jpg
Views: 38
Size: 62.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21802d1501262657-turbo-regal-img_6793.jpg?*=d0d7d0846534b5e14978e447bec95335)
Moisture on the pan
![Name: IMG_6794.jpg
Views: 34
Size: 53.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21803d1501262657-turbo-regal-img_6794.jpg?*=d0d7d0846534b5e14978e447bec95335)
Uh..yuck
![Name: IMG_6795.jpg
Views: 34
Size: 72.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21804d1501262657-turbo-regal-img_6795.jpg?*=d0d7d0846534b5e14978e447bec95335)
The car was cold
![Name: IMG_6798.jpg
Views: 35
Size: 90.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21805d1501262657-turbo-regal-img_6798.jpg?*=d0d7d0846534b5e14978e447bec95335)
Here'* the coolant hose wrap around. I'm thinking the heat of the cooling system did this, Ben can you please confirm, thanks.
![Name: IMG_6799.jpg
Views: 42
Size: 118.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21806d1501262657-turbo-regal-img_6799.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6800.jpg
Views: 32
Size: 94.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21807d1501262657-turbo-regal-img_6800.jpg?*=d0d7d0846534b5e14978e447bec95335)
Aussie tensioner
![Name: IMG_6802.jpg
Views: 38
Size: 79.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21808d1501262657-turbo-regal-img_6802.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6804.jpg
Views: 38
Size: 90.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21809d1501262657-turbo-regal-img_6804.jpg?*=d0d7d0846534b5e14978e447bec95335)
Located more moisture
![Name: IMG_6808.jpg
Views: 34
Size: 113.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21810d1501262657-turbo-regal-img_6808.jpg?*=d0d7d0846534b5e14978e447bec95335)
Gettin in there
![Name: IMG_6809.jpg
Views: 31
Size: 154.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21811d1501262657-turbo-regal-img_6809.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6810.jpg
Views: 38
Size: 145.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21812d1501262657-turbo-regal-img_6810.jpg?*=d0d7d0846534b5e14978e447bec95335)
Who'* great idea at ZZP was it to not tap the metal of the flange? ZZFail I tell ya. It could have been much easier, much. Ben used 15mm nuts here, and 14'* on the downpipe. Kept me hopping to the toolbox, thanks for the exercise, lol
![Name: IMG_6815.jpg
Views: 34
Size: 118.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21813d1501262657-turbo-regal-img_6815.jpg?*=d0d7d0846534b5e14978e447bec95335)
Here kitty kitty, this might rub in reverse. Although there were no signs that it ever did.
![Name: IMG_6817.jpg
Views: 31
Size: 77.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21814d1501262657-turbo-regal-img_6817.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6818.jpg
Views: 36
Size: 92.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21815d1501262657-turbo-regal-img_6818.jpg?*=d0d7d0846534b5e14978e447bec95335)
Now we can get into the valve cover.
![Very Happy](https://www.gmforum.com/gm/images/smilies/biggrin.gif)
![Name: IMG_6819.jpg
Views: 31
Size: 116.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21816d1501262657-turbo-regal-img_6819.jpg?*=d0d7d0846534b5e14978e447bec95335)
Here is a super clean engine.
![Name: IMG_6821.jpg
Views: 36
Size: 148.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21817d1501262657-turbo-regal-img_6821.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6822.jpg
Views: 39
Size: 120.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21818d1501262657-turbo-regal-img_6822.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6824.jpg
Views: 35
Size: 154.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21819d1501262657-turbo-regal-img_6824.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6827.jpg
Views: 36
Size: 163.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21820d1501262657-turbo-regal-img_6827.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6830.jpg
Views: 32
Size: 126.2 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21821d1501262657-turbo-regal-img_6830.jpg?*=d0d7d0846534b5e14978e447bec95335)
Paul..you want left or right?
![Name: IMG_6832.jpg
Views: 39
Size: 109.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21822d1501262657-turbo-regal-img_6832.jpg?*=d0d7d0846534b5e14978e447bec95335)
How it sleeps until I return with the trans and a small pan to put the lifters in to soak
![Name: IMG_6833.jpg
Views: 35
Size: 85.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21823d1501262657-turbo-regal-img_6833.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6834.jpg
Views: 34
Size: 133.5 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21824d1501262657-turbo-regal-img_6834.jpg?*=d0d7d0846534b5e14978e447bec95335)
#5
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Already got past the visible ones. My next concern is if the double roller timing chain gear on the crank was chamfered for the issue of it being an Aussie chain and this being a US crank. (different noses/chamfers that causes issues on the US ones not aligning properly.) If that'* out of whack then I need a crank gear to match up and drop at the machine shop.
#7
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
Pulled the lifters, labeled and soaking in oil.
![Name: IMG_6839.jpg
Views: 36
Size: 92.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21772d1501262657-turbo-regal-img_6839.jpg?*=d0d7d0846534b5e14978e447bec95335)
Took the balancer off and oil pan bolts. This aluminum pan makes it easy, the mount stays on it. No need to jockey three jacks.
![Name: IMG_6840.jpg
Views: 39
Size: 113.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21773d1501262657-turbo-regal-img_6840.jpg?*=d0d7d0846534b5e14978e447bec95335)
Water pump pulley is off, as are the timing cover bolts
![Name: IMG_6841.jpg
Views: 35
Size: 105.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21774d1501262657-turbo-regal-img_6841.jpg?*=d0d7d0846534b5e14978e447bec95335)
Timing cover off, no signs of issues from the double roller chain
![Name: IMG_6844.jpg
Views: 35
Size: 143.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21775d1501262657-turbo-regal-img_6844.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6847.jpg
Views: 40
Size: 87.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21776d1501262657-turbo-regal-img_6847.jpg?*=d0d7d0846534b5e14978e447bec95335)
First time doing a cam through the wheel well. You nearly have to drop it on the ground
![Name: IMG_6848.jpg
Views: 33
Size: 114.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21777d1501262657-turbo-regal-img_6848.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6849.jpg
Views: 35
Size: 147.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21778d1501262657-turbo-regal-img_6849.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6851.jpg
Views: 33
Size: 95.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21779d1501262657-turbo-regal-img_6851.jpg?*=d0d7d0846534b5e14978e447bec95335)
Timing chain is off. It was chamfered at home to accept the US crankshaft (timing set is Aussie and doesn't fit 100% out of the box)
![Name: IMG_6852.jpg
Views: 31
Size: 127.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21780d1501262657-turbo-regal-img_6852.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6854.jpg
Views: 34
Size: 88.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21781d1501262657-turbo-regal-img_6854.jpg?*=d0d7d0846534b5e14978e447bec95335)
A holey situation
![Name: IMG_6855.jpg
Views: 30
Size: 126.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21782d1501262657-turbo-regal-img_6855.jpg?*=d0d7d0846534b5e14978e447bec95335)
The way it looked
![Name: IMG_6856.jpg
Views: 34
Size: 123.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21783d1501262657-turbo-regal-img_6856.jpg?*=d0d7d0846534b5e14978e447bec95335)
I think this cam was stored in a submarine
![Name: IMG_6857.jpg
Views: 31
Size: 113.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21784d1501262657-turbo-regal-img_6857.jpg?*=d0d7d0846534b5e14978e447bec95335)
Machinist told me the last time I was there to polish a couple of cams that all they were doing was using an oily green scrubby pad to polish. It'* not very abrasive. Off to Home Depot. Hardly recognize it.
![Name: IMG_6864.jpg
Views: 35
Size: 136.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21785d1501262657-turbo-regal-img_6864.jpg?*=d0d7d0846534b5e14978e447bec95335)
It'* in the motor and ready to be buttoned up
![Name: IMG_6866.jpg
Views: 36
Size: 116.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21786d1501262657-turbo-regal-img_6866.jpg?*=d0d7d0846534b5e14978e447bec95335)
I always get dots lining up pictures
![Name: IMG_6868.jpg
Views: 33
Size: 89.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21787d1501262657-turbo-regal-img_6868.jpg?*=d0d7d0846534b5e14978e447bec95335)
Timing cover back on, lower radiator hose reinstalled, subframe back in place
![Name: IMG_6872.jpg
Views: 36
Size: 150.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21788d1501262657-turbo-regal-img_6872.jpg?*=d0d7d0846534b5e14978e447bec95335)
Power steering res and pump mounted again. Darn thing fought well
![Name: IMG_6875.jpg
Views: 33
Size: 119.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21789d1501262657-turbo-regal-img_6875.jpg?*=d0d7d0846534b5e14978e447bec95335)
Pushrods in
![Name: IMG_6877.jpg
Views: 38
Size: 149.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21790d1501262657-turbo-regal-img_6877.jpg?*=d0d7d0846534b5e14978e447bec95335)
Rockers reinstalled and torqued
![Name: IMG_6878.jpg
Views: 35
Size: 173.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21791d1501262657-turbo-regal-img_6878.jpg?*=d0d7d0846534b5e14978e447bec95335)
About to put the valve covers on and I notice.. the gaskets are L67/L32 (like I purchased) and the valve cover is for an L36/L26. Ordering the correct gaskets today. :bonk: Went in and took a shower.
![Name: IMG_6839.jpg
Views: 36
Size: 92.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21772d1501262657-turbo-regal-img_6839.jpg?*=d0d7d0846534b5e14978e447bec95335)
Took the balancer off and oil pan bolts. This aluminum pan makes it easy, the mount stays on it. No need to jockey three jacks.
![Name: IMG_6840.jpg
Views: 39
Size: 113.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21773d1501262657-turbo-regal-img_6840.jpg?*=d0d7d0846534b5e14978e447bec95335)
Water pump pulley is off, as are the timing cover bolts
![Name: IMG_6841.jpg
Views: 35
Size: 105.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21774d1501262657-turbo-regal-img_6841.jpg?*=d0d7d0846534b5e14978e447bec95335)
Timing cover off, no signs of issues from the double roller chain
![Name: IMG_6844.jpg
Views: 35
Size: 143.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21775d1501262657-turbo-regal-img_6844.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6847.jpg
Views: 40
Size: 87.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21776d1501262657-turbo-regal-img_6847.jpg?*=d0d7d0846534b5e14978e447bec95335)
First time doing a cam through the wheel well. You nearly have to drop it on the ground
![Name: IMG_6848.jpg
Views: 33
Size: 114.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21777d1501262657-turbo-regal-img_6848.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6849.jpg
Views: 35
Size: 147.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21778d1501262657-turbo-regal-img_6849.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6851.jpg
Views: 33
Size: 95.7 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21779d1501262657-turbo-regal-img_6851.jpg?*=d0d7d0846534b5e14978e447bec95335)
Timing chain is off. It was chamfered at home to accept the US crankshaft (timing set is Aussie and doesn't fit 100% out of the box)
![Name: IMG_6852.jpg
Views: 31
Size: 127.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21780d1501262657-turbo-regal-img_6852.jpg?*=d0d7d0846534b5e14978e447bec95335)
![Name: IMG_6854.jpg
Views: 34
Size: 88.6 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21781d1501262657-turbo-regal-img_6854.jpg?*=d0d7d0846534b5e14978e447bec95335)
A holey situation
![Name: IMG_6855.jpg
Views: 30
Size: 126.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21782d1501262657-turbo-regal-img_6855.jpg?*=d0d7d0846534b5e14978e447bec95335)
The way it looked
![Name: IMG_6856.jpg
Views: 34
Size: 123.9 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21783d1501262657-turbo-regal-img_6856.jpg?*=d0d7d0846534b5e14978e447bec95335)
I think this cam was stored in a submarine
![Name: IMG_6857.jpg
Views: 31
Size: 113.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21784d1501262657-turbo-regal-img_6857.jpg?*=d0d7d0846534b5e14978e447bec95335)
Machinist told me the last time I was there to polish a couple of cams that all they were doing was using an oily green scrubby pad to polish. It'* not very abrasive. Off to Home Depot. Hardly recognize it.
![Name: IMG_6864.jpg
Views: 35
Size: 136.4 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21785d1501262657-turbo-regal-img_6864.jpg?*=d0d7d0846534b5e14978e447bec95335)
It'* in the motor and ready to be buttoned up
![Name: IMG_6866.jpg
Views: 36
Size: 116.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21786d1501262657-turbo-regal-img_6866.jpg?*=d0d7d0846534b5e14978e447bec95335)
I always get dots lining up pictures
![Name: IMG_6868.jpg
Views: 33
Size: 89.3 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21787d1501262657-turbo-regal-img_6868.jpg?*=d0d7d0846534b5e14978e447bec95335)
Timing cover back on, lower radiator hose reinstalled, subframe back in place
![Name: IMG_6872.jpg
Views: 36
Size: 150.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21788d1501262657-turbo-regal-img_6872.jpg?*=d0d7d0846534b5e14978e447bec95335)
Power steering res and pump mounted again. Darn thing fought well
![Name: IMG_6875.jpg
Views: 33
Size: 119.0 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21789d1501262657-turbo-regal-img_6875.jpg?*=d0d7d0846534b5e14978e447bec95335)
Pushrods in
![Name: IMG_6877.jpg
Views: 38
Size: 149.8 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21790d1501262657-turbo-regal-img_6877.jpg?*=d0d7d0846534b5e14978e447bec95335)
Rockers reinstalled and torqued
![Name: IMG_6878.jpg
Views: 35
Size: 173.1 KB](https://www.gmforum.com/attachments/general-gm-chat-88/21791d1501262657-turbo-regal-img_6878.jpg?*=d0d7d0846534b5e14978e447bec95335)
About to put the valve covers on and I notice.. the gaskets are L67/L32 (like I purchased) and the valve cover is for an L36/L26. Ordering the correct gaskets today. :bonk: Went in and took a shower.
#10
DINOSAURUS BOOSTUS
![](/images/badges/Gearhead.png)
Expert Gearhead
Thread Starter
![Default](https://www.gmforum.com/images/icons/icon1.gif)
I think it'* a PT61, not sure. I can get a better picture.
It'* my first time going through the wheel well. A lot of people do it this way. Overall it'* not much less work IMO than pulling the motor. Yet being my first time..it may seem that way because of the first time syndrome.
It'* my first time going through the wheel well. A lot of people do it this way. Overall it'* not much less work IMO than pulling the motor. Yet being my first time..it may seem that way because of the first time syndrome.