92-99 ones are different from the 00-05 ones

Ahhh, ya, I knew that.

ok , just some thing to up grade the 97 a little bit . no hurry at all , when you get back to the buttom of it all .

the 2000 mat wont work in the 92-99 longer and narrower

will it lay down and slide under the front seat , just looking to cover some of the carpet

not a clue. will try it at Dans saturday with one of mine

no hurry . Just some thing for cover and protection . I use rubber mats over the carpet mats in the Lesabre then remove the them for the special outings.

yeah laying on the cold concrete didnt make a difference to me mainly do to the fact that i was already froze, not to mention i was wearing layers for the most part

def a fun weekend, thanks for the hospitality dan! hope ya had as much fun as i did

however i know you hated that lumina and steves car by the time the day was over

FWIW guys.. it'll be quicker to pull it as full drivetrain. Then seperate it once it'* out since you have the master and all that stuff out of the way.

The only things that are a pain are those two motor mounts in the wheel wells. I find supporting the body, yank the times unbolt their main bolt in the wheel well, drop it all a bit and then unbolt (not studded, they are bolts) the mounts and the whole thing will lift right up and out.

If you are liking aluminum scrap prices. It would be worthwhile to grab the subframe, control arms and front/rear bumper supports.

Glad to see the Lumina was just the bad UIM like I hoped.

Found a pic of the engine bracket