Has anyone disassembled their backseat. I need to because when I got my tint done the guy removed the rear deck and did a single piece on my rear window including the brake light. But when he reassembled the back he put the seat belt'* in the wrong place so they dont work. I am too lazy to find out how to take it apart. So it'* easier to ask if anyone has done it or how to do it. Just tell me what bolts I have to find and where and I'll take it from there. Thanks in advance.

On my '92 you grab the top of the headrest, push down and it will pop up. With the bottom cushion, you get in front of it, push it in towards the trunk and it will pop out as well.

99se

msg me, i've done it

you have to push the lower cushion toward the rear of the vehicle on each side. There are clips under it you have to get out of. After that, you will see all the seatbelt bolts and what not that hold the rear of the seat in place. Once you undo all those, you will have to lift the rear off, to get it off of similar clips. Any questions, msg me.

Lee

Ok that'* what I thought, but I would rather ask before I break something. I'll message you skza if I got any more questions.