This artice is very helpful on a lot of things i found i decided to share with you all

you gonna post it?

http://64.233.179.104/search?q=cache...or+Valve&hl=en

Good talkin' with ya, Kenn. I hate to see people sink money into ABS/TC problems, considering they're so damn hard to diagnose and fix. I've spent alot of time researching the system, and know it inside and out. Almost to the point I could build a better system.

Good luck with yours, and keep us posted.

well today i used the TECH2 and guess what it told me it told me all 4 bearings are bad well one was shot and the other 3 was brand new previously installed 3 weeks ago.. Will isnt lying about tryin to track down the ABS codes and solve them correctly tomorrow challenge is goin to be the PMV and a good brake bleeding

changed the brake fluid out and no abs light came off bled the pmv and still the same problem going to go to the junkyard and borrow one from them and see what makes this thing tick

Good luck. It'* a PITA to change. Your back will be killing you when you're done, as you have to reach down in there bent over all day. Try putting the car up on ramps first.

backs hurting right now