Nice Chat WIth WIll on PMV
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Nice Chat WIth WIll on PMV
This artice is very helpful on a lot of things i found i decided to share with you all
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
#4
Junior Member
Posts like a Ricer Type-R
Good talkin' with ya, Kenn. I hate to see people sink money into ABS/TC problems, considering they're so damn hard to diagnose and fix. I've spent alot of time researching the system, and know it inside and out. Almost to the point I could build a better system.
Good luck with yours, and keep us posted.
Good luck with yours, and keep us posted.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
well today i used the TECH2 and guess what it told me it told me all 4 bearings are bad well one was shot and the other 3 was brand new previously installed 3 weeks ago.. Will isnt lying about tryin to track down the ABS codes and solve them correctly tomorrow challenge is goin to be the PMV and a good brake bleeding
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
changed the brake fluid out and no abs light came off bled the pmv and still the same problem going to go to the junkyard and borrow one from them and see what makes this thing tick
#7
Junior Member
Posts like a Ricer Type-R
Good luck. It'* a PITA to change. Your back will be killing you when you're done, as you have to reach down in there bent over all day. Try putting the car up on ramps first.
Thread
Thread Starter
Forum
Replies
Last Post
wjcollier07
Lounge
12
11-23-2006 09:43 PM