I'm in the process of accumulating all the technical data that would pertain to performance intakes. My goal is to create a website as a one-stop shopping point for this information. Some of the information I need to nail down are the TB and IAT specs

Please post the inner and outer diameter of your Throttle body intake plenum (in either inches or mm, or preferably both), and the diameter of the HEAD of the IAT sensor. I have a pretty good idea of what these are, but need confirmation. This pertains to all 87-04 cars, both NA and SC.

Mine:

TB OD: 81mm/3.2"
TB ID: 77mm/3.05
IAT length: Long (series 2 is short)
IAT diameter: 5/8" (.625")
1993 SSEi

Thank you in advance for your information.

Noee ???

I'll try and get you a reading in the mornin'

Fixed it. Typing in the dark while talkin on the cell with Don.

you gonna make a techinfo site about DIY intakes, or whats the plan?

The info will be available for anyone who wants it. That'* the purpose. I'd like to see everyone get an intake, one way or another.

I'll do it this week.

Bump.

I don't wanna know...I don't wanna know...I don't wanna know...




Should mine be the same as yours, Will? Or should I check for ya?

I've got 92/93 covered, but you might want to take my measurements and verify for me?

What I really need the most right now is a 94 SE, SLE, or SSE, and a Series 2 L67.