heads from the 93 and bolt them right up on mine...
Thread Starter
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 1
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
heads from the 93 and bolt them right up on mine...
Originally Posted by BillBoost37
Originally Posted by bandit
MMmmmMmmm those rockers look good.... 
so how hard is it to replace them so i can stop my stupid ticking!!!?
so how hard is it to replace them so i can stop my stupid ticking!!!?
Originally Posted by BillBoost37
Originally Posted by Mortehl
Stop me if I'm wrong, but couldn't bandit just take the heads from the 93 and bolt them right up? With new gaskets of course.
The question could be better answered if specifically addressed
So can i, :?: this is off the parts car at bills house.
Senior Member
Certified Car Nut
Joined: Oct 2003
Posts: 19,756
Likes: 1
they are compatable as Bill has pointed out.....
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Originally Posted by 1993 SLE
they are compatable as Bill has pointed out.....
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
Senior Member
Certified Car Nut
Joined: Oct 2003
Posts: 19,756
Likes: 1
Originally Posted by willwren
Originally Posted by 1993 SLE
they are compatable as Bill has pointed out.....
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
we have them, they are sitting on the floor of the garage, and available....PM me
just as an FYI you will need head bolts for the re-installation
Thread Starter
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 1
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
Originally Posted by BillBoost37
And you are pretty sure swapping heads is going to fix that up?
i have a Valve tap Knock.... isn't that usly a bad pushrod or lifter of rocker?