More headaches again.
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Oct 2002
Location: N.W. Indiana
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
More headaches again.
Now my tranny & airbag light are acting up. Last week got my tranny flushed and a couple of days later the first gear is acting up. When I am at a complete stop and start to go the car shudders really bad. Only does it if I am easy on the gas. I only have 78k on the car. The fluid is filled full, also they put the right fluid in. Today on the way home from work the airbag light started coming on and off. I can only imagine what is wrong with it. Tomorrow I am going to hook it up to a reader and see if any codes pop up. It figures things would start to go wrong considering the extended warranty expired 400 miles before this. But its still on it course of every 10k miles something goes terribbly wrong.
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
The codes will us to find whats up, if you have a cracked or shrunken o-ring in the control assembly you can get a bit of shudder but that is usually limited to only one gear setting. Does the problem seem to be only in first gear or secound?
#3
For your airbag light it can be something as simple as your seatbelt latch, yes that'* right your seatbelt latch.
On one of my parents Montana'* they had the air bag light come on and off, they had it checked out and sure enough it was the seatbelt latch.
On one of my parents Montana'* they had the air bag light come on and off, they had it checked out and sure enough it was the seatbelt latch.
#4
Senior Member
True Car Nut
Join Date: Feb 2004
Location: Pennsylvania
Posts: 5,177
Likes: 0
Received 0 Likes
on
0 Posts
I had that airbag light flash on an Explorer before. It scared the crap out of me. Thought I was gonna get a bag in my face at any moment. Finally I just pulled over turned it on and off three times in a row then everything was fine.
#5
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Oct 2002
Location: N.W. Indiana
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PontiacDad
The codes will us to find whats up, if you have a cracked or shrunken o-ring in the control assembly you can get a bit of shudder but that is usually limited to only one gear setting. Does the problem seem to be only in first gear or secound?
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
It shouldnt be too bad if its isolated which its sounding like. It'll be either a sticky valve or cracked o-ring on the 1-2 shift assembley from the sound of the shake? The tranny flush must have dislodged some junk?
#7
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
yea usually when u flush a tranny u get all the junk outta it and it sits there till it gets flushed again thats why i get mine flushed twice
#8
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Oct 2002
Location: N.W. Indiana
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Ok. Thanks for the input. Tomorrow after work on the way home Ill stop by the shop and see what they have to say. Maybe Ill be able to rig something so I can get a discount or something. Still going to try to hook up the computer and see whats with the airbag.
#9
Senior Member
True Car Nut
Join Date: Mar 2004
Location: Maryland, USA
Posts: 3,089
Likes: 0
Received 0 Likes
on
0 Posts
Mike:
The seatbelt latch on our 98 montana went late last year. Cost to fix including labor was $391.86. We needed the seatbelt kit. This must be a common failure as my dealer only showed one kit in the metro area.
The seatbelt latch on our 98 montana went late last year. Cost to fix including labor was $391.86. We needed the seatbelt kit. This must be a common failure as my dealer only showed one kit in the metro area.
Thread
Thread Starter
Forum
Replies
Last Post