do you have any pictures of the original? that looks totally stock, i cant imagine what it used to look like

stock picture it with only one switch for the top (flip type)

btw amazing job boosty

angle eye/ fog light switches?

Looks awsome eather way!

I dont believe you




Boosty got skilz yo.

Original on right, Memorex in the middle and my latest homelink on left


And if you think I photoshopped it.. check out the JB Weld

When I first glanced at this prior to putting on my glasses, I thought it said Boosty got skitzo. lol.........naaah! j/k Excellent craftsmanship, Bill. It looks like a piece out of the GM parts stream.

A bit off center, but eh, it'* good.

Start off with a good dremel and plenty of JB Weld.. (there'* never too much JB in the house)

I cut the donor out, cut the good one about the same size and fit.. sanded, measured..measured and measured again. Finally got the position where I wanted it and taped in place. Added JB Weld as the glue to hold it and material to build up. Waited for JB to set up and then flipped it and added to the other side. Walk away for 5 hours. Get up too early this morning and sand, sand and sand more.. shape the edges a little and sand more.. change to higher grit..sand sand sand.

When it'* perfectly smooth and it looks perfect, use plastic adhesion promoter, then texture coat..then paint.

Good eye for detail, man.

Really impressive work, Bill!