Endlink upgrade..what should I buy?
#12
Senior Member
Posts like a Corvette
Join Date: Aug 2004
Location: South Bend, IN (hometown) Indianapolis,IN (college)
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by erics95se
so this is available at all autozones?
what kind of pricing am i to expect ?
what kind of pricing am i to expect ?
#13
Guest
Posts: n/a
Originally Posted by ELMACHOGERACHO
Originally Posted by Peterg22000
Originally Posted by 1993 SLE
yes and they are availble at AutoZone
PN 8105 and 8120
PN 8105 and 8120
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#14
Rear Kit 9.8105R $15.99
http://autozone.com/servlet/UiBroker...EEGS%7C%7Etrue
Front Kit 9.8120R $20.99
http://autozone.com/servlet/UiBroker...0%7C%7E9.8120R
3.5" long 3/8" Grade 8 bolts cost $3 for 2 of them and 30 cents for the two nylock nuts.
When I looked at the kit, it said on the package that it came with Grade 5 bolts. What'* the difference?
Anyway, I was VERY impressed with this upgrade. It'* the first thing to do before going to new shocks/springs. Getting the old components apart will be the hardest thing with all the rust. Get some PB Blaster penetrating oil to take care of it.
http://autozone.com/servlet/UiBroker...EEGS%7C%7Etrue
Front Kit 9.8120R $20.99
http://autozone.com/servlet/UiBroker...0%7C%7E9.8120R
3.5" long 3/8" Grade 8 bolts cost $3 for 2 of them and 30 cents for the two nylock nuts.
When I looked at the kit, it said on the package that it came with Grade 5 bolts. What'* the difference?
Anyway, I was VERY impressed with this upgrade. It'* the first thing to do before going to new shocks/springs. Getting the old components apart will be the hardest thing with all the rust. Get some PB Blaster penetrating oil to take care of it.
#17
Senior Member
Posts like a Camaro
Join Date: Jun 2005
Location: n.h.
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
I did mine at Bill'* yesterday .....I make a good difference.....From what bill noticed and me the fronts were fairly new and really east to get off.....the rear is easy......and if u can't get it off, just cut it off, right Bill?? Anyways I think I need to tighten mine up a little more....it'* better but not as tight as I would like it!! For u though it should make a big diffenence if they have never been changed out before!!
#19
Senior Member
Posts like a Corvette
Join Date: Aug 2004
Location: South Bend, IN (hometown) Indianapolis,IN (college)
Posts: 1,598
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by handdrumman
and if u can't get it off, just cut it off, right Bill??
#20
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ELMACHOGERACHO
Originally Posted by handdrumman
and if u can't get it off, just cut it off, right Bill??