could I
Thread Starter
Senior Member
Posts like a Turbo
Joined: Jul 2006
Posts: 410
Likes: 0
From: Indianapolis

could I put this HUD in my 95 SE?
http://cgi.ebay.com/ebaymotors/BONNE...QQcmdZViewItem
or would there be problems
http://cgi.ebay.com/ebaymotors/BONNE...QQcmdZViewItem
or would there be problems
You'll hear people say you don't need the WS, but you DO. You won't be pleased with the image quality if you don't.
3 people here have done it. Two 92-95'*, and one 87-91.
You need:
HUD unit w/adjusting mechanism.
Dash surround with HUD control cutout.
ENTIRE DASHBOARD from a HUD equipped car.
Upper Dash Trim from a HUD equipped car.
Factory service manuals.
I had this planned for my SLE. It'* frustrating to have a HUD on one car and not the other, and I found myself speeding in the SLE out of ignorance. It'* just not worth the time and effort at this point for me.
3 people here have done it. Two 92-95'*, and one 87-91.
You need:
HUD unit w/adjusting mechanism.
Dash surround with HUD control cutout.
ENTIRE DASHBOARD from a HUD equipped car.
Upper Dash Trim from a HUD equipped car.
Factory service manuals.
I had this planned for my SLE. It'* frustrating to have a HUD on one car and not the other, and I found myself speeding in the SLE out of ignorance. It'* just not worth the time and effort at this point for me.
Yes I am planning it.......Bill is right on with his post...
I spent HOURS in my FSM'* looking for the wires, Good thing for me, I had a 93 SSEi parts car that i pulled the entire Wire Harness out of..and when i say entire harness i mean the entire harness....from Front headlight to Rear taillight....It took me a long *** time to trace all thoes wires too....
there are only 8 wires that need to be connected to make the HUD Work (electronically) BUT you need all the other hard parts to get it right...the dash is the major hurdle. Most of the SSEI dashers are cracked in some fashion, making it really hard to find a nice one. Never the less
this project is not for the faint of hert, and you better be damn good at Wiring
I spent HOURS in my FSM'* looking for the wires, Good thing for me, I had a 93 SSEi parts car that i pulled the entire Wire Harness out of..and when i say entire harness i mean the entire harness....from Front headlight to Rear taillight....It took me a long *** time to trace all thoes wires too....
there are only 8 wires that need to be connected to make the HUD Work (electronically) BUT you need all the other hard parts to get it right...the dash is the major hurdle. Most of the SSEI dashers are cracked in some fashion, making it really hard to find a nice one. Never the less
this project is not for the faint of hert, and you better be damn good at Wiring
Originally Posted by nagel79
i emailed the buyer, all they have is the unit, no wires, no controls so it sounds like a big head ache
Thread Starter
Senior Member
Posts like a Turbo
Joined: Jul 2006
Posts: 410
Likes: 0
From: Indianapolis

well i'm still going to try and do it, i'm just going to look for a car that has it all intact, I'm going to be hitting up this pick'n pull in evansville and hopefully i can find one with everything together





