Cam bolts for Lambda GMT-966 struts
Thread Starter
Senior Member
True Car Nut
Joined: Feb 2015
Posts: 6,827
Likes: 1,009
From: Earth
Cam bolts for Lambda GMT-966 struts
Okay, so no answers (yet, I still have hope) over in: https://www.gmforum.com/saturn-204/c...es-etc-312726/
. . . so I'm breaking part of that very-wordy question out for general consideration. This could be for any Lambda including the Acadia, Outlook, Enclave, and Traverse.
Without major suspension damage etc., are cam bolts a normal and/or acceptable replacement for the splined bolts that secure the bottom of the front struts?
If GM didn't want an adjustment there, is it acceptable that a shop would essentially alter the factory design by adding an adjustment where there wasn't already one?
. . . so I'm breaking part of that very-wordy question out for general consideration. This could be for any Lambda including the Acadia, Outlook, Enclave, and Traverse.
Without major suspension damage etc., are cam bolts a normal and/or acceptable replacement for the splined bolts that secure the bottom of the front struts?
If GM didn't want an adjustment there, is it acceptable that a shop would essentially alter the factory design by adding an adjustment where there wasn't already one?
Last edited by CathedralCub; Sep 18, 2019 at 06:07 PM. Reason: Added a capital "A"
Thread
Thread Starter
Forum
Replies
Last Post
rel3rd
Performance, Brainstorming & Tuning
45
Jul 20, 2005 09:10 AM
