What is the wattage of the Angle Eyes? If the wattage is 50 watts will the stock wiring carry the 50 watt load?

yes i believe that he hooked the lights up to the factory wiring he needs help with the rings

you could run it through where the wire harness comes through, you need to remove the glovebox to get to that

Do you have any pictures of where it comes through, and where to put it through. I took off the fuse cover yesterday and saw a bunch of wires going through the firewall there but didn't really feel llike tangling with any of them. If you could give me some tips as of how to get the wires through there I would appreciate it.

let me look in the FSM how to get throught there

if i remember correctly there should be a connector between the engine wires and inside wires

you will have to remove the Maxifuse relay center cover to see the harness

I got the wire through the firewall, all I gotta do is get an extension. Is there any type of connectors that would match up directly with the one that is on the wire for the angel eyes. I'm a little reluctant to splice into those wires.

just get a male or femal connector I cant remember which one it is and add it the the existing wiring

Where could I get one?

go to wally world and there should be different types of connectors male and female that will work with the AA wiring

w00t 2000 posts

Would any of these work?

Or if anybody could give me a link to a website that has some, that would be just grand. Oh and wallyworld.com isn't an electrical site 1993 SLE. I found that out the hard way.