ADTR series II
Thread Starter
Senior Member
Posts like a Northstar
Joined: Mar 2003
Posts: 632
Likes: 0
From: Fairhaven,Mass
ADTR series II
has anyone recieved there intake from hector. i nstalled mine and finding it a bit displeasing. it'* got performance but the cone filter is hitting the PCM box and the clamp is just baly tight nd it has been bolted all the way. does anyone else had a problem with this or just me
Guest
Posts: n/a
Originally Posted by Muslimsteel
i know that bonnie94sse got his from hector and i was considering getting one from there....hopefully if it going to be like that then maybe not... :?
Senior Member
Posts like a Northstar
Joined: Dec 2002
Posts: 587
Likes: 0
From: Western, Mass
You could put a piece of foam inbetween the box and the PCM and probably pick up a tighter clamp at the parts store cheap. like 3 bucks probably.
Also, Msteel....you need to put your name on the list if you want one. It'* in vendors. There won't be any more made if you don't sign up and theres enough demand.
Also, Msteel....you need to put your name on the list if you want one. It'* in vendors. There won't be any more made if you don't sign up and theres enough demand.
Senior Member
Certified Car Nut
Joined: Oct 2002
Posts: 11,308
Likes: 2
I got mine, and the only thing I didn't like was the blue silicone reducer, but that'* minor. It was a bit too big, but I reused my stock clamp that held the accordian tube to the TB, and it was fine. The clamp that came with it for the TB end was not nearly tight enough, so I had to use the stock one. But the performance makes up for the blue reducer. I may get a black one later.
Jeep2Bonny: Is your cone filter clamp barely tight or one of the other ones? Maybe for the filter hitting the PCM box, you might have to trim the reducer like Will had to, to get a different angle. But I'm not sure. I'd have to see it.
Jeep2Bonny: Is your cone filter clamp barely tight or one of the other ones? Maybe for the filter hitting the PCM box, you might have to trim the reducer like Will had to, to get a different angle. But I'm not sure. I'd have to see it.
Senior Member
Certified Car Nut
Joined: Oct 2002
Posts: 11,308
Likes: 2
Where'* the PCM box on his? If it'* on on the outside of the cone filter, he could trim the reducer at an angle so it would move the filter a bit toward the radiator.
Unless the PCM is in front of the filter, then I don't know...prob get a different cone?
Unless the PCM is in front of the filter, then I don't know...prob get a different cone?
Senior Member
Posts like a Turbo
Joined: Aug 2002
Posts: 333
Likes: 0
From: Funky Town, Texas
Placing a piece of foam between the PCM and the filter on theADTR intake is a good idea for the 1996+ cars. My filter rubbed a small hole in the side of it and had to be replaced. 