Whats involved in the supercharger coupler replacement?
Thread Starter
Member
Posts like a V-Tak
Joined: Sep 2006
Posts: 70
Likes: 0
From: moorhead, mn
Whats involved in the supercharger coupler replacement?
A friend has a 1995 Bonneville SSEI with 186K on it. The supercharger coupler was bad for a while and I think now it is completely falling apart. I have never replaced one but know what it is, green thing usually that fits in the 3 pins on the nose drive and the on rotors. So what parts do I need to complete the job and where is the best place to buy them?
Mike
Mike
Senior Member
Certified GM nut
Joined: Oct 2006
Posts: 2,028
Likes: 1
From: burb of detroit. 2 miles north of 8 mile Rd.
on a 95 L67, the sc would have to come off. and I would strongly recomend him to change the LIM gaskets at the same time.
you would need..
1 */C gasket
2 injector O-rings
3 coupler (i know, duhh)
4 anerobic gasket maker (NOT rtv)
5 sc oil from the dealer. (4-6 oz.)
6 LIM gaskets (aluminum framed recomended)
7 coolant
8 12 pack of favorite brew
9 possibly limes, depending on favorite brew.
ps, if he decides not to do the LIM, omit #* 6 and 7.
you would need..
1 */C gasket
2 injector O-rings
3 coupler (i know, duhh)
4 anerobic gasket maker (NOT rtv)
5 sc oil from the dealer. (4-6 oz.)
6 LIM gaskets (aluminum framed recomended)
7 coolant
8 12 pack of favorite brew
9 possibly limes, depending on favorite brew.
ps, if he decides not to do the LIM, omit #* 6 and 7.
Thread
Thread Starter
Forum
Replies
Last Post
retiredstudent
Forced Induction
7
Feb 16, 2010 12:13 PM