Forced Induction All questions and problems regarding Superchargers, Turbos, NOS, ZEX, intercoolers, water injection, etc.

Series 2 pulley removal....

Old Apr 1, 2005 | 11:27 PM
  #1  
LakevilleSSEi's Avatar
Thread Starter
Senior Member
True Car Nut
 
Joined: Sep 2004
Posts: 9,130
Likes: 0
From: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
LakevilleSSEi is on a distinguished road
Default Series 2 pulley removal....

How?? Working on Fantastic88'* 97 LSS tonight.....And I need to know how that pulley comes off....and how it goes on. And will I need any special tools???? I'm pretty sure it'* the same way as a Series 1....but wanna make sure. Thanks
Reply
Old Apr 1, 2005 | 11:58 PM
  #2  
harofreak00's Avatar
BANNED
 
Joined: Mar 2004
Posts: 0
Likes: 2
From: Purgatory
harofreak00 is on a distinguished road
Default

its not hte same way... its press fit...

you need a special puller...
Reply
Old Apr 2, 2005 | 12:00 AM
  #3  
1993 SLE's Avatar
Senior Member
Certified Car Nut
 
Joined: Oct 2003
Posts: 19,756
Likes: 1
1993 SLE is on a distinguished road
Default

Originally Posted by harofreak00
its not hte same way... its press fit...

you need a special puller...

correct
Reply
Old Apr 2, 2005 | 12:14 AM
  #4  
OLBlueEyesBonne's Avatar
Senior Member
True Car Nut
 
Joined: Dec 2002
Posts: 5,459
Likes: 0
From: Sauk Centre, MN
OLBlueEyesBonne is on a distinguished road
Default

Your best bet is to go over to www.mncgp.com/forum and find someone near you (shouldn't be hard -they are practically a dime a dozen there in the TC'*) with a puller.
Just don't ruin the stock pulley using the Series I pulley.
Reply
Old Apr 2, 2005 | 12:14 AM
  #5  
LakevilleSSEi's Avatar
Thread Starter
Senior Member
True Car Nut
 
Joined: Sep 2004
Posts: 9,130
Likes: 0
From: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
LakevilleSSEi is on a distinguished road
Default

what kinda puller??? I have a 4" jaw puller...Like what I used on my car to pull my pulley off when me and Fantastic88 installed my pulley and coupler. Will that work?
Reply
Old Apr 2, 2005 | 12:16 AM
  #6  
harofreak00's Avatar
BANNED
 
Joined: Mar 2004
Posts: 0
Likes: 2
From: Purgatory
harofreak00 is on a distinguished road
Default

Originally Posted by LakevilleSSEi
what kinda puller??? I have a 4" jaw puller...Like what I used on my car to pull my pulley off when me and Fantastic88 installed my pulley and coupler. Will that work?
no

need this

http://www.pulleyboys.com/gmm90pt.html

The OEM pulley is pressed on with tremendous force, up to a .002" press fit, resulting in more than six tons of pressure required to remove it. Through use and development, Pulleys Boys designed the three-bolt puller tool to be the toughest puller tool available.
Reply
Old Apr 2, 2005 | 01:08 AM
  #7  
LakevilleSSEi's Avatar
Thread Starter
Senior Member
True Car Nut
 
Joined: Sep 2004
Posts: 9,130
Likes: 0
From: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
LakevilleSSEi is on a distinguished road
Default

Ok, so what are the odds that I can find that available tommorow here in the cities?
Reply
Old Apr 2, 2005 | 01:13 AM
  #8  
OLBlueEyesBonne's Avatar
Senior Member
True Car Nut
 
Joined: Dec 2002
Posts: 5,459
Likes: 0
From: Sauk Centre, MN
OLBlueEyesBonne is on a distinguished road
Default

Originally Posted by LakevilleSSEi
Ok, so what are the odds that I can find that available tommorow here in the cities?
I bet you should be able to find one.
If you are up for cruisin tonight head up to Wendy'* on University Ave -alot of the MNCGP guys and gals hang out there every weekend.
Reply
Old Apr 2, 2005 | 03:02 AM
  #9  
LakevilleSSEi's Avatar
Thread Starter
Senior Member
True Car Nut
 
Joined: Sep 2004
Posts: 9,130
Likes: 0
From: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
LakevilleSSEi is on a distinguished road
Default

hrmmmm....doubt thewy have them in their trunks though....LOL....Fantastic88 said he'd get on MNCGP tommorow night or something and see what he can dig up...otherwise we'll have to wait until next weekend I guess.
Reply
Old Apr 2, 2005 | 10:18 AM
  #10  
tripscarcare95's Avatar
Senior Member
Posts like a Camaro
 
Joined: Jul 2004
Posts: 1,090
Likes: 0
From: Canada, Ontario
tripscarcare95 is on a distinguished road
Default pulley

How har dit is to swap the superhcarger pulley on a series 1, i have the pulley but i want to put it on right. Thanks
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:15 AM.