Well I noticed a couple days ago that I had no boost on my car while on my way to a funeral. Well today I opened my hood to find no belt going to my supercharger. My question is what is the part number and the best place to get a new belt for it, its a 2000 SSEi.

Thanks for the help!!

head down to the local parts store and pick one up.

Just ask them for the belt for the supercharger.

Then follow the belt path in your owners manual for installation. you'll be all set in record time.

If you never done one before your in for some FUN!! Right Bill?

Bill did mine for me to show me and then when I tried later on, I still had trouble. lol keep trying though, you'll get it!!

He'* a 2000 + Tony...it'* much easier on his.

eh, I did it, no problem. Getting the belt was the hard part, haha. Just make sure that pressure thingy (<--I know you guys are gonna rip me apart for saying that, haha) is all the way over, and TRIPLE check the pulleys; make sure they're in the center, and make sure that they're going the right way. Look at the picture on the fan if you have it, it'* not that bad

Oh sure easier....pft...

once you get the hang of it, the 00+ sc belt can be taken off and put back on in under 1 min theres nothing in the way

Thanks guys, will give it a try tomorrow after work. Hate driving the thing without the SC!!! Put the peddle to the floor and there is no head throwing back!

At least you are able to drive your car without the SC belt!

Pete is trying to get at the fact of Series 1 the SC belt also drives the water pump. Series 2 it does not.