Got to replace the SC-hints

Reply Subscribe

Thread Tools

Search this Thread

Jan 27, 2004 | 10:22 AM

Rosco the Iroc

Thread Starter

Senior Member

Posts like a Northstar

Joined: Nov 2002

Posts: 773

Likes: 0

From: Va Beach VA, Where ever I may Roam!

Rosco the Iroc is on a distinguished road

Got to replace the SC-hints

I have to R/R the SC on my '94, Any suggestions on probs to look out for. Special tools and or adjustments that are needed and torques.

Jan 28, 2004 | 12:46 AM

kennlee

Senior Member

Posts like a Northstar

Joined: Sep 2002

Posts: 604

Likes: 0

From: Sedro-Woolley, Washington

Here is a coupler replacement "How To" I did on my 93. It should help a lot. You can also check the Techinfo section, there is a lot of info there and there is also a "Sticky" at the top of the Forced Induction forum with a gob of info.

http://www.cardomain.com/memberpage/479367/2

Need help? let us know

ken

Jan 28, 2004 | 02:36 AM

willwren

Junior Member

Posts like a Ricer Type-R

Joined: Aug 2002

Posts: 11

Likes: 13

All the torques are in Techinfo, Ken'* page will help alot. I have an old thread here with SC teardown with pics or something like that. Here are some other helpful links:

http://www.williamwren.com/Bonnevill...ebuild%201.jpg

http://www.williamwren.com/Bonnevill...ebuild%202.jpg

This procedure is basically (and almost totally) the same for both the M62 and M90. All you need is sockets, ratchet, and torque wrench. Nothing more special than that.