Belt size for 3.4" pulley
Senior Member
Posts like a Northstar
Joined: Aug 2003
Posts: 666
Likes: 0
From: Buffalo Grove, IL
The stock belt will fit, but you should get the smaller one ASAP, to insure that it isn't slipping. Incidentally I have been on my stock belt and 3.4 puley for several months now with now problems.
Senior Member
True Car Nut
Joined: May 2003
Posts: 3,022
Likes: 1
From: Holt, MI & Lima, OH
I don't know about the pre-00 SSEi'*, but the 00+ SSEi'* have a longer belt stock than the GTP'* due to the different coil pack setup. Since the earlier SSEi'* didn't have the upper motor mounts either I would guess they would be the same. If thats the case, the stock belt is a 72.5" long belt, and with a 3.4 pulley you will need a 71.5" belt. 
Most part numbers for the belt will end in 715 (meaning 71.5 inches).
Edit: Just looked it up, and the pre 00'* do still have the longer belt. So you will need a 71.5" long belt.
Shawn
Most part numbers for the belt will end in 715 (meaning 71.5 inches).Edit: Just looked it up, and the pre 00'* do still have the longer belt. So you will need a 71.5" long belt.
Shawn
Senior Member
Posts like a Northstar
Joined: Mar 2003
Posts: 551
Likes: 2
From: Brewerton NY
Originally Posted by karfreek
Here are the Part Numbers for the Goodyear Gatorback Drive belts for Series II 3800s for the Bonneville.
Accessory Belt (A/C, Power Steering, etc...) 4060940-$35 @ Autozone
Supercharger Belt-(when Using the stock 3.8" pulley)-4060725-$22 @ Autozone
Supercharger Belt-(When using SLP 3.4" pulley, has to be special ordered, takes 3 days)-4060715-$16 @ Autozone
Hope this helps.
Jay
Accessory Belt (A/C, Power Steering, etc...) 4060940-$35 @ Autozone
Supercharger Belt-(when Using the stock 3.8" pulley)-4060725-$22 @ Autozone
Supercharger Belt-(When using SLP 3.4" pulley, has to be special ordered, takes 3 days)-4060715-$16 @ Autozone
Hope this helps.
Jay
Thread
Thread Starter
Forum
Replies
Last Post
Mark Peters
Performance, Brainstorming & Tuning
10
Mar 21, 2003 08:42 PM
