94 SC on a 92 Pulley swap
Thread Starter
Senior Member
Certified Car Nut
Joined: Mar 2003
Posts: 12,433
Likes: 2
94 SC on a 92 Pulley swap
For a while I've had a 2.25" pulley on the 94 SC that I put on my 92. Call it a test run. Well, I put the stock 92 pulley back on it. It made a great difference in top end. Low end torque suffered a little bit, but is much more happy above 3000 rpm.
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
With the 2.25 pulley on a 94 or 95 SC, you get into the heat loss zone where the SC is running very inefficient at the higher RPM'*.
Unless you find a way to intercool or water inject, always stick with the Stock 92/93 pulley size on a 94 or 95 SC, never smaller.
Unless you find a way to intercool or water inject, always stick with the Stock 92/93 pulley size on a 94 or 95 SC, never smaller.
Thread
Thread Starter
Forum
Replies
Last Post
Allmachtige
1992-1999
1
Oct 5, 2006 08:31 PM
dbtk2
Performance, Brainstorming & Tuning
13
Aug 27, 2003 11:30 AM
