94 PA supercharger on a 92 SSEi..
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Jan 2006
Location: Edmonton, Alberta, Canada
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
94 PA supercharger on a 92 SSEi..
Just curious if the supercharger from a 94 parkave is interchangable with my 92 SSEi, since I picked it up at the wreckers today, for the sheer fact that there is no play in the nose drive, and I think the boost conrtols on my 92 are going south...
#2
Junior Member
Posts like a Ricer Type-R
No. Your throttle body won't even bolt up, the EGR inlet is a different size, and it will cost you hours and days and weeks and months of tuning and fighting it to get it to work.
You want a Gen2 M62 from 91-93 only.
You want a Gen2 M62 from 91-93 only.
#3
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Jan 2006
Location: Edmonton, Alberta, Canada
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Well, here'* a little update today...
I was looking over your supercharger info, and noticed that the supercharger that I pulled off looked identical to the one that is supposed to be in my 92, which is a Gen2 M62... is it possible that the 94 Park Ave has an old Gen2 on it? I can't see any differences between the 2, going by what is posted on your site, and looking at the one I bought... the mounting flanges are identical, and the nosecone is short.
The pulley appears to be 2 7/8", same with the throttle body diameter...
And, if the supercharger really is different, can I use the nose cone? I'm really after just the coupler, but thought this might be an easier solution, just a simple plug and pray... er.. play...
If you would like, I can post some pics....
I was looking over your supercharger info, and noticed that the supercharger that I pulled off looked identical to the one that is supposed to be in my 92, which is a Gen2 M62... is it possible that the 94 Park Ave has an old Gen2 on it? I can't see any differences between the 2, going by what is posted on your site, and looking at the one I bought... the mounting flanges are identical, and the nosecone is short.
The pulley appears to be 2 7/8", same with the throttle body diameter...
And, if the supercharger really is different, can I use the nose cone? I'm really after just the coupler, but thought this might be an easier solution, just a simple plug and pray... er.. play...
If you would like, I can post some pics....
Thread
Thread Starter
Forum
Replies
Last Post
salmanman
Performance, Brainstorming & Tuning
21
03-27-2003 02:29 PM
Mr Bean
1992-1999
9
02-19-2003 11:34 PM
Cat88Extreme
Performance, Brainstorming & Tuning
6
02-03-2003 01:39 AM