So I today I was coming home and noticed that when I flick on my right turn signal it doesn't blink. It just comes on and stays on inside and out of the car. The left one works fine.

I'm going to put my stock PCM back in later today and see if that solves anything.

Any ideas?

do all the bulbs work?

The front end inside right bulb doesn't work, but it could just be out.

ok...i would try and replace that bulb......IF that dosent solve it then your Turn signal flasher might have gone bad

PCM should have zero affect on this problem. Usually, the "no blinky" problem is to let you know one of your bulbs is out.

Alright, senario two on this is Melissas problem....Both lights are good, front and the two in back. Her right turn signal stays on, but no blinky. Could I just replace the blinky signal module..[LoL]