VATS bypass help requested
#11
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2003
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the clarification billha.
I did use method #2 for installing the resistor.
I used 2 - 1,500 Ohm resistors soldered together because the chip in the key gave me a reading of about 3,000 Ohms. The 2 - 1,5000 Ohm resistors added together were the closest to 3,000 Ohms I could come up with using the resistors I found at the local Radio Shack.
Dave
I did use method #2 for installing the resistor.
I used 2 - 1,500 Ohm resistors soldered together because the chip in the key gave me a reading of about 3,000 Ohms. The 2 - 1,5000 Ohm resistors added together were the closest to 3,000 Ohms I could come up with using the resistors I found at the local Radio Shack.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
suctoes
Audio (and aftermarket electronics)
21
11-23-2005 08:01 AM
randy
Audio (and aftermarket electronics)
2
08-27-2003 12:20 PM