I had a freind of mine bring home a device that I put my ignition key in and it spits out a code for my VATS resistor. It pulled a code 7. My question is..... is there a chart I can look at to see what type of resistor to use for the bypass?

maybe well...... there is a list of vats resistance, and they may be listed by number

Yes. Do you know where I can find this chart?

Look for a very recenst thread about the VATS system on here......There was just some discussion about this and I think that they listed off some if not all of the resistances based on the number of the VATS.

Try this link, it may be of some help.

http://home.t-online.de/home/O_Scholz/vats.html

My apologies for the double post.

Key number Resistor reading in Ohms

1 392
2 523
3 681
4 887
5 1.13k
6 1.47k
7 1.87k
8 2.37k
9 3.01k
10 3.74k
11 4.75k
12 6.04k
13 7.50k
14 9.53k
15 11.80k

All you need is a $15 digital multi meter to measure the resistence of the pellet.

Negative. Because the readings given by my fluke meter were incorrect.