Manual switch for Tract Control
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: Oct 2002
Posts: 103
Likes: 0
From: Watertown, Wisconsin
Manual switch for Tract Control
Hi
I tore apart like half of my car'* interior so I'm familiar with the electronics.
I got to the little circuit board that has a tiny manual switch soldered on it, for the Traction Control. Then there is the weird plastic button part that makes the button behave like a momentary on/off.
What would I need to do to setup a nicer TC switch somewhere else, either pushbutton or switch, that wouldn't need to be disabled everytime I get in the car? How would I solder it to that little board? And I'm a little afraid to anyway, it'* so tiny! Any ideas?
Thanks!
Daron
I tore apart like half of my car'* interior so I'm familiar with the electronics.
I got to the little circuit board that has a tiny manual switch soldered on it, for the Traction Control. Then there is the weird plastic button part that makes the button behave like a momentary on/off.
What would I need to do to setup a nicer TC switch somewhere else, either pushbutton or switch, that wouldn't need to be disabled everytime I get in the car? How would I solder it to that little board? And I'm a little afraid to anyway, it'* so tiny! Any ideas?
Thanks!
Daron
Senior Member
Posts like a Northstar
Joined: Jun 2004
Posts: 555
Likes: 0
http://www.bonnevilleclub.com/forum/...ic.php?t=30743
check this out for the current discussion on this issue.
check this out for the current discussion on this issue.
Thread
Thread Starter
Forum
Replies
Last Post
corvettecrazy
Everything Electrical & Electronic
14
Nov 11, 2006 11:57 AM
parallelcircuits
1992-1999
4
May 2, 2003 05:24 PM
