HIR
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: Jul 2007
Posts: 137
Likes: 0
From: Rochester, NY 14609
i have siverstar ultras in my olds sillohette. i ride with the high beams on all the time and i get no flashes. but i was thinking about putting them in a black 96 SE. i think they would look pretty decent
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: Jul 2007
Posts: 137
Likes: 0
From: Rochester, NY 14609
for the 9005 9006 conversion, do you really need to put 2 O-rings on like it shows because when i looked at the 9005 and 9006 the O-ing looked the same size
Senior Member
True Car Nut
Joined: Jan 2006
Posts: 8,029
Likes: 1
From: NEBF:06,07 | NYBF:06,07 | ONBF:06,07 | CNBF:06 & more............
HIR- thats what i have in my car.
They put out WAY more light then any Halogen Bulb
http://www.rallylights.com/hella/9006.asp
http://www.rallylights.com/hella/9005.asp
They put out WAY more light then any Halogen Bulb
General Electric patented this new technology in 2000. Their intention was to create a bulb that emits about 3/4 as many lumins as an HID capsule at a fraction of the cost. The technology was licensed to Toshiba for automotive use.
The technology involves a specially shaped quartz globe which has multiple layers of semi-reflective materials deposted on the inside surface of the bulb. The coating reflets a portion of the Infra red energy emited by the filament back to the filament causing it to glow hotter and produce more light, which escapes through the uncoated forward portion of the globe. Even though the filament runs hotter, the bulb produces about the same amount of heat as a stock bulb.
Interestingly enough, the 9012 bulb can be used in a 9006 lamp with a simple modification with a Dremel tool or file. Due to federal regulations, we can not make this modification, but you, the end user, can. The material to remove is marked on each bulb.
The technology involves a specially shaped quartz globe which has multiple layers of semi-reflective materials deposted on the inside surface of the bulb. The coating reflets a portion of the Infra red energy emited by the filament back to the filament causing it to glow hotter and produce more light, which escapes through the uncoated forward portion of the globe. Even though the filament runs hotter, the bulb produces about the same amount of heat as a stock bulb.
Interestingly enough, the 9012 bulb can be used in a 9006 lamp with a simple modification with a Dremel tool or file. Due to federal regulations, we can not make this modification, but you, the end user, can. The material to remove is marked on each bulb.
http://www.rallylights.com/hella/9005.asp
Thread
Thread Starter
Forum
Replies
Last Post
xtremerevolution
Detailing & Appearance
14
Jun 17, 2012 11:51 PM
