Code 31, 18, 41, 58 part 2 with pics
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
i need a part number for the harness going from the ignition control module and to the crank and cam sensor
#4
Senior Member
Certified Car Nut
Originally Posted by jwikoff99
I cannot find apart number for the wiring harness.
BTW, that looks like some major surgery going on there.
#6
Senior Member
Certified Car Nut
Yeah, I suppose you could rebuild it, as long as the connectors are not burnt. If they are, dealerships have them, sometimes.
Then you could list "custom wiring" in your mods.
Then you could list "custom wiring" in your mods.
#7
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jwikoff99
Yeah, I suppose you could rebuild it, as long as the connectors are not burnt. If they are, dealerships have them, sometimes.
Then you could list "custom wiring" in your mods.
Then you could list "custom wiring" in your mods.
#8
Junior Member
Posts like a Ricer Type-R
I don't have any numbers for that harness in any of my books. Kennginn, I can't see the damage in that pic, can you shoot a closeup? Give a description about WHERE in the harness it is? Is it melted through to the copper?
I still think your best option is to get a harness from a wrecker.
If you tell me exactly which part of the harness is damaged, I can give you the pinout from the schematic to check it and verify.
I still think your best option is to get a harness from a wrecker.
If you tell me exactly which part of the harness is damaged, I can give you the pinout from the schematic to check it and verify.
#9
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
burnt to the copper on 4 sets of wires
connectors are ok junkyard will be later today once i can catch ssesc93
connectors are ok junkyard will be later today once i can catch ssesc93
#10
Junior Member
Posts like a Ricer Type-R
****, you toasted that one, huh? What fried it? Front exhaust manifold?
Good luck at the wrecker, and consider wrapping the harness in hi-temp tape or good wire loom. (Available at Napa of course )
Keep us posted. I'll be on and off all day.
Off-topic, our #15 is running in the top 5 at Dover right now!
Good luck at the wrecker, and consider wrapping the harness in hi-temp tape or good wire loom. (Available at Napa of course )
Keep us posted. I'll be on and off all day.
Off-topic, our #15 is running in the top 5 at Dover right now!