Do you have a question, Kenn?

I cannot find apart number for the wiring harness.

i need a part number for the harness going from the ignition control module and to the crank and cam sensor

I dug through my FSM, but no reference to the number. Bill, where you at?


BTW, that looks like some major surgery going on there.

should i try and splice it?

Yeah, I suppose you could rebuild it, as long as the connectors are not burnt. If they are, dealerships have them, sometimes.

Then you could list "custom wiring" in your mods.

all right

I don't have any numbers for that harness in any of my books. Kennginn, I can't see the damage in that pic, can you shoot a closeup? Give a description about WHERE in the harness it is? Is it melted through to the copper?

I still think your best option is to get a harness from a wrecker.

If you tell me exactly which part of the harness is damaged, I can give you the pinout from the schematic to check it and verify.

burnt to the copper on 4 sets of wires
connectors are ok junkyard will be later today once i can catch ssesc93

****, you toasted that one, huh? What fried it? Front exhaust manifold?

Good luck at the wrecker, and consider wrapping the harness in hi-temp tape or good wire loom. (Available at Napa of course )

Keep us posted. I'll be on and off all day.

Off-topic, our #15 is running in the top 5 at Dover right now!