Auto Down Passenger Window
#21
Senior Member
Certified GM nut
Join Date: Dec 2005
Location: dekalb illinois
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Actually keeping everything here in the open forum is best for all to see/do it.
I'll get a picture of the module tonight.
I'll get a picture of the module tonight.
#22
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
I can't really help you out with the door panel.
Blowing another fuse.. heck..that takes the fun out of it. We didn't have any fuse issues and did this mod to two cars.
Blowing another fuse.. heck..that takes the fun out of it. We didn't have any fuse issues and did this mod to two cars.
#26
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
I did the wiring in under 5 minutes.
The time is door panel removal. Some people take longer than others....and some of us had someone do it for us while we were at work.
The time is door panel removal. Some people take longer than others....and some of us had someone do it for us while we were at work.
#27
Senior Member
Certified GM nut
Join Date: Dec 2005
Location: dekalb illinois
Posts: 1,916
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
I did the wiring in under 5 minutes.
The time is door panel removal. Some people take longer than others....and some of us had someone do it for us while we were at work.
The time is door panel removal. Some people take longer than others....and some of us had someone do it for us while we were at work.
but hey thanks for the idea and i am going to get right on it
sounds like almost a direct hook up lord knows it will be harder than it seems
#28
DINOSAURUS BOOSTUS
Expert Gearhead
Thread Starter
Wake...pulling the door panel is the hardest part.
Then it'* hook two wires from the modue to your exising motor connector wires. And one to Cavity A (aka power) of the door swich wiring.
That'* it. An Alien without looking at the schematics or anything was told that and did it successfully. Surely if an Alien can do it..you can do it.
Then it'* hook two wires from the modue to your exising motor connector wires. And one to Cavity A (aka power) of the door swich wiring.
That'* it. An Alien without looking at the schematics or anything was told that and did it successfully. Surely if an Alien can do it..you can do it.