tis a very good point what i am worried about is blowing another damn fuse and taking my door panel off i never have good luck with that

I can't really help you out with the door panel.

Blowing another fuse.. heck..that takes the fun out of it. We didn't have any fuse issues and did this mod to two cars.

Tell the Alien to make sure he tracks down another module and switch and I'll come up to NC when he gets back

Will do...PM also sent on some I have in stock.

well about the response to how long it takes (i would just like to know)
cause maybe i can do it this sunday

I did the wiring in under 5 minutes.

The time is door panel removal. Some people take longer than others....and some of us had someone do it for us while we were at work.

why dont i live in conneticut why do i have to live in illinois i could have you do it for me :P
but hey thanks for the idea and i am going to get right on it
sounds like almost a direct hook up lord knows it will be harder than it seems

Wake...pulling the door panel is the hardest part.

Then it'* hook two wires from the modue to your exising motor connector wires. And one to Cavity A (aka power) of the door swich wiring.

That'* it. An Alien without looking at the schematics or anything was told that and did it successfully. Surely if an Alien can do it..you can do it.

it this the beast????

that black box with 4 wires going into it???

yes that is the box, the 4th wire is probably a ground....which is not really hard to find a place for.