Nate brought this up last weekend at the MNBC meet, and it'* been eating me all week.

Has anyone with this problem swapped out the Ignition Control Module? If so did it fix the loapy idle?

I figured I'd ask here before I go and spend money on something that'* not going to work.

I know mine isn't original. IMine was replaced a couple years ago witha new one (OEM replacement I believe). No idle change after it was replaced, but I have done most of my modding after that time frame If I remeber correctly. I did have the lopey idle when I started to take her apart, but not as bad as nate has it now.

I haven't heard Nate'* lately, but my loapy idle is getting so bad the car almost stalls. There'* almost a 600rpm drop when it 'loaps'. :?

If you need to swap parts to test things... you know where you can find some...

What you mean by loapy?

vrer ver ver va va va ga ver ver ver va va va ga





ok it was worth a shot lol. bascially goes up then down

I know when I had a mean vac leak my car was real loapy.
And your oil pressure is cool right?

oil pressure at idle is right around 45 when warm at idle, and under full throttle it climbs up to around 80, or slightly higher -definitely in good shape with oil pressure.

I checked Marty'* car last weekend and there was no vaccum leaks that I could locate, as the same with my car. I'm convinced it'* electrical somewhere,

My riveria has the same problem. I read somewhere that the fuel pressure regulator has to be changed :?: Don't quote me on that . I always assumed it was the coil packs but now I wonder?